NFPA 24 – 10.3.6.2* (2013) requires that ‘all bolted joint accessories’ be cleaned and coated with asphalt or other corrosion-resisting material.
A 10.3.6.2 describes it not being necessary to coat ‘mechanical bolt fittings’ or epoxy-coated valves and glands. We are looking at an underground supply and are between discussions with the water purveyor and contractor on exactly what this means. Hoping someone from the list can help us with our question of identifying the difference between a joint accessory and mechanical bolt fittings that would require one to be coated and the other not? The restraint being used is FM Approved but we are also searching that out a bit more to know which specific approval it is. The manufacturer is indicating that yes, the bolts should be covered in asphalt as they are the accessory while the rings or elbows are the fittings. Does this sound right? Is this being enforced regularly in other parts of the country? Thanks in Advance, David David Smith | Deputy Fire Marshal P 503.635.0378 | F 503.635.0376 [email protected] 300 B Avenue | PO BOX 369 Lake Oswego OR 97034 PUBLIC RECORDS LAW DISCLOSURE This e-mail is a public record of the City of Lake Oswego and is subject to public disclosure unless exempt from disclosure under Oregon Public Records Law. This email is subject to the State Retention Schedule. _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
