Thanks -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Morey, Mike Sent: Wednesday, August 05, 2015 8:53 AM To: [email protected] Subject: Re: smooth ATR
GMP facilities are all this way, though most of them are also stainless only for hanger material, so you may want to check into that. Mike Morey, CFPS, SET Planner Scheduler/Designer BMWC Constructors, Inc. 1740 W. Michigan St, Indianapolis, IN 46222 O: 317.651.0596 | C: 317.586.8111 [email protected] | www.bmwc.com ________________________________________ From: Sprinklerforum <[email protected]> on behalf of Tom Duross <[email protected]> Sent: Wednesday, August 5, 2015 9:49 AM To: [email protected] Subject: RE: smooth ATR Fastenal, great supplier. Must be real old school, that's the way fitters used to do it, thread their own rod. TD -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Dewayne Martinez Sent: Wednesday, August 05, 2015 9:49 AM To: [email protected] Subject: smooth ATR Anyone know of a supplier of non-threaded galvanized or cadnium plated rod stock? We have a job which has a requirement for only the last 3in of the rod to be threaded and they won't allow dipped rod. Thanks, Dewayne _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.o rg _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.o rg _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
