The chain-wrench you are referring to is the Central/ Tyco CPVC hold back wrench part 3002.
Chuck Wyse CFI -1 Field Investigator , Technical Product Support Specialist Engineered Systems, USA Technical Services, Fire Protection Products Johnson Controls Mobile: +1 302 559 0387<tel:+1%20302%20559%200387> Direct: +1 302 559 0387<tel:+1%20302%20559%200387> [email protected]<mailto:[email protected]> Johnson Controls 1400 Pennbrook Parkway <x-apple-data-detectors://6> Lansdale PA 19446 <x-apple-data-detectors://6> USA<x-apple-data-detectors://6> THIS MESSAGE MAY CONTAIN INFORMATION THAT IS PRIVILEGED AND CONFIDENTIAL. The information contained in, or attached to, this message is intended solely for the use of the specific person(s) named above. If you are not the intended recipient then you have received this communication in error and are prohibited from review, retransmission, taking any action in reliance upon, sharing the content of, disseminating or copying this message and any of the attachments in any way. If you have received this communication in error, please contact the sender immediately and promptly delete this message from all types of media and devices. Thank you. On Sep 28, 2017, at 4:10 PM, Micah Davis, SET <[email protected]<mailto:[email protected]>> wrote: Just remembered one more trick I once saw. A technician I worked with had a chain wrench that resembled a small oil filter wrench with the head at a right angle. It reminded me of a plumbers basin wrench, but it had a chain on the end instead. He was able to work it into a wall and wrap it around the CPVC fitting to hold back on the fitting while removing a sidewall sprinkler for replacement. I'm not sure where he found it, but you might be able to find a similar tool and squeeze it up beside the sprinkler in the hole in the freezer ceiling. Micah Davis www.dyanamicfiredesigns.com<http://www.dyanamicfiredesigns.com> -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of proud-texan Sent: Thursday, September 28, 2017 1:40 PM To: [email protected]<mailto:[email protected]> Subject: Re: Removing Dry Sprinklers Even King Kong wouldn't be strong enough to lift an 18" pipe wrench while holding the other end of an 8' cheater pipe. But I appreciate your suggestion. _______________________________________________ Sprinklerforum mailing list [email protected]<mailto:[email protected]> https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.firesprinkler.org_listinfo.cgi_sprinklerforum-2Dfiresprinkler.org&d=DwIGaQ&c=0YGvTs3tT-VMy8_v51yLDw&r=vnczw2fNyMAqdaKUw5vFyOaCoZh4rHSDnL0zFGJkbHE&m=eVF0KXjAXWGmyM-C8K-IAX1Wcx1NT1T6AP1Qg13uzto&s=vWgv7Byg6gBUtACqK0f75-JaHUyoUnUmRo1KmPOc_6I&e= _______________________________________________ Sprinklerforum mailing list [email protected]<mailto:[email protected]> https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.firesprinkler.org_listinfo.cgi_sprinklerforum-2Dfiresprinkler.org&d=DwIGaQ&c=0YGvTs3tT-VMy8_v51yLDw&r=vnczw2fNyMAqdaKUw5vFyOaCoZh4rHSDnL0zFGJkbHE&m=eVF0KXjAXWGmyM-C8K-IAX1Wcx1NT1T6AP1Qg13uzto&s=vWgv7Byg6gBUtACqK0f75-JaHUyoUnUmRo1KmPOc_6I&e= ________________________________ This e-mail contains privileged and confidential information intended for the use of the addressees named above. If you are not the intended recipient of this e-mail, you are hereby notified that you must not disseminate, copy or take any action in respect of any information contained in it. If you have received this e-mail in error, please notify the sender immediately by e-mail and immediately destroy this e-mail and its attachments.
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
