Thanks Mark, sounds logical to me. Ill pass it on to the AHJ and see what they want.
Rocci Cetani III, CET Senior Designer Water-Based Fire Protections Systems Layout, Nicet Level III Northern California Fire Protection Services Inc. 16840 Joleen Way Bldg. A Morgan Hill, CA 93037 P-(408) 776-1580 EXT.111 F-(408) 776-1590 [email protected]<mailto:[email protected]> www.norcalfire.com<http://www.norcalfire.com/> CONFIDENTIALITY NOTICE: This message and any document accompanying it may contain confidential information belonging to the sender. The information is intended only for the use of individual or entity named above. If you are not the intended recipient, or the employee or agent responsible to deliver this message to the intended recipient, you are hereby notified that any disclosure, copying or taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this transmission in error, please immediately notify us by telephone to arrange for return of the documents. From: Sprinklerforum [mailto:[email protected]] On Behalf Of Phillips, Mark Sent: Wednesday, January 24, 2018 11:07 AM To: [email protected] Subject: RE: powder coating ovens First I would discuss with the AHJ IMHO NO protection required Based on FM Data Sheet 6-9 1. Oven is non combustible 2. Material being processed is non combustible 3. No accumulation of drippings or spraying happening in the oven NFPA 86 requires that a “study shall be conducted to determine the need” I would present the info above to discuss with the AHJ. [http://www.jjkllc.com/signatures/kirlinlogo.png] Mark Phillips Vice President of Fire Protection , Kirlin Carolinas, LLC t: 919-526-1584<tel:919-526-1584> [email protected]<mailto:[email protected]> | http://www.kirlingroup.com<http://www.jjkllc.com/> Raleigh , NC 27617 [http://www.jjkllc.com/signatures/twitter.png]<https://twitter.com/KirlinGroup> [http://www.jjkllc.com/signatures/facebook.png]<https://www.facebook.com/kirlinllc> [http://www.jjkllc.com/signatures/linkedin.png]<https://www.linkedin.com/company/133201/> From: Sprinklerforum [mailto:[email protected]] On Behalf Of Rocci 3 Cetani Sent: Wednesday, January 24, 2018 1:57 PM To: [email protected]<mailto:[email protected]> Subject: RE: powder coating ovens 14-6 x 13x6 with 12’ ceiling Rocci Cetani III, CET Senior Designer Water-Based Fire Protections Systems Layout, Nicet Level III Northern California Fire Protection Services Inc. 16840 Joleen Way Bldg. A Morgan Hill, CA 93037 P-(408) 776-1580 EXT.111 F-(408) 776-1590 [email protected]<mailto:[email protected]> www.norcalfire.com<http://www.norcalfire.com/> CONFIDENTIALITY NOTICE: This message and any document accompanying it may contain confidential information belonging to the sender. The information is intended only for the use of individual or entity named above. If you are not the intended recipient, or the employee or agent responsible to deliver this message to the intended recipient, you are hereby notified that any disclosure, copying or taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this transmission in error, please immediately notify us by telephone to arrange for return of the documents. From: Sprinklerforum [mailto:[email protected]] On Behalf Of Phillips, Mark Sent: Wednesday, January 24, 2018 10:55 AM To: [email protected]<mailto:[email protected]> Subject: RE: powder coating ovens So similar but different scenario When doing a crematory no heads are required inside the oven? Factors It gets to hot There is no real occupancy The actual oven is design to withstand heat and fire How big is this oven? [http://www.jjkllc.com/signatures/kirlinlogo.png] Mark Phillips Vice President of Fire Protection , Kirlin Carolinas, LLC t: 919-526-1584<tel:919-526-1584> [email protected]<mailto:[email protected]> | http://www.kirlingroup.com<http://www.jjkllc.com/> Raleigh , NC 27617 [http://www.jjkllc.com/signatures/twitter.png]<https://twitter.com/KirlinGroup> [http://www.jjkllc.com/signatures/facebook.png]<https://www.facebook.com/kirlinllc> [http://www.jjkllc.com/signatures/linkedin.png]<https://www.linkedin.com/company/133201/> From: Sprinklerforum [mailto:[email protected]] On Behalf Of Rocci 3 Cetani Sent: Wednesday, January 24, 2018 1:42 PM To: [email protected]<mailto:[email protected]> Subject: powder coating ovens Looking for some guidance on hazard classification for a large oven used for curing powder coating and NFPA 86 wasn’t much help. Per NFPA 33 powder coating booths are OH2 so logically I would think the oven curing the powder coating would be OH2…. Thought? Thanks Rocci Cetani III, CET Senior Designer Water-Based Fire Protections Systems Layout, Nicet Level III Northern California Fire Protection Services Inc. 16840 Joleen Way Bldg. A Morgan Hill, CA 93037 P-(408) 776-1580 EXT.111 F-(408) 776-1590 [email protected]<mailto:[email protected]> www.norcalfire.com<http://www.norcalfire.com/> CONFIDENTIALITY NOTICE: This message and any document accompanying it may contain confidential information belonging to the sender. The information is intended only for the use of individual or entity named above. If you are not the intended recipient, or the employee or agent responsible to deliver this message to the intended recipient, you are hereby notified that any disclosure, copying or taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this transmission in error, please immediately notify us by telephone to arrange for return of the documents.
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
