The city permit office should/might have records of who did the 
installation…and if you’re lucky, they may have a copy of the plans. You may 
have to pay a fee to obtain any records. 
Ask the AHJ cause all cities have different permit, plan review, and record 
storage processes. 
Rick Matsuda 

> On Sep 7, 2023, at 10:39 AM, Brian Harris <[email protected]> wrote:
> 
> 
> Steve-
> Thank you. Problem is this place has all gwb ceilings which might be a pain.
>  
> Brian Harris, CET
> BVS Systems Inc.
> bvssytemsinc.com
>  
>  
> From: Steve Mackinnon <[email protected]> 
> Sent: Thursday, September 07, 2023 10:44 AM
> To: Discussion list on issues relating to automatic fire sprinklers 
> <[email protected]>
> Subject: [Sprinklerforum] Re: Hydraulic Placards
>  
> Hey Brian,
>  
> I use to do this for a couple companies… I only surveyed the “remote area” 
> and main piping back to the alarm valve.
>  
> The AHJ is just looking for a replacement Placard, not plans or calcs.
>  
> Good luck!
> Steven
> From: Brian Harris <[email protected]> 
> Sent: Thursday, September 7, 2023 10:07 AM
> To: [email protected]
> Subject: [Sprinklerforum] Hydraulic Placards
>  
> I’m sure this has been asked before but here goes… An existing apartment 
> complex was flagged by the AHJ for not have Riser placards. The building has 
> changed owners a couple times so nobody knows who the original sprinkler 
> company was. Is it realistic to think the entire system would have to be 
> surveyed and enough laid out to run new calcs?
>  
> Brian Harris, CET
> BVS Systems Inc.
> bvssystemsinc.com
> Phone: 704.896.9989
> Fax: 704.896.1935
>  
>  
> 
> _________________________________________________________
> SprinklerForum mailing list:
> https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org
> To unsubscribe send an email to [email protected]
_________________________________________________________
SprinklerForum mailing list:
https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org
To unsubscribe send an email to [email protected]

Reply via email to