Hey Antony and Ben,
I have verified that the Pinger process is at fault.
I don't know if it's a bug or not.
You can disable pinger and it will work:
http://www.squid-cache.org/Doc/config/pinger_enable/
pinger_enable off
will resolve this issue.
All The Bests,
Eliezer
----
Eliezer Croitoru
NgTech, Tech Support
Mobile: +972-5-28704261
Email: ngtech1...@gmail.com
-----Original Message-----
From: squid-users <squid-users-boun...@lists.squid-cache.org> On Behalf Of
Antony Stone
Sent: Monday, March 14, 2022 11:27
To: squid-users@lists.squid-cache.org
Subject: Re: [squid-users] SQUID refuses to listen on any TCP Port
On Monday 14 March 2022 at 05:42:35, ben wrote:
> Hi Eliezer,
>
> SQUID started listening only after I run "ip6tables -P INPUT ACCEPT".
Without seeing the rest of your iptables rules, it's not clear whether this
really does apply to every interface and every protocol, or whether there
are
exception rules which over-ride this default policy rule.
However, there are quite a number of applications which will refuse to
start,
or not operate correctly, if you do not permit loopback traffic (IPv4 as
well as
IPv6), so this may be the cause of your problems.
Antony.
--
"Once you have a panic, things tend to become rather undefined."
- murble
Please reply to the list;
please *don't* CC
me.
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
