FAQ says: "As a rule of thumb on Squid uses approximately 10 MB of RAM per GB of the total of all cache_dirs (more on 64 bit servers such as Alpha), plus your cache_mem setting and about an additional 10-20MB. It is recommended to have at least twice this amount of physical RAM available on your Squid server. For a more detailed discussion on Squid's memory usage see the sections above."
So I have 6,8 Gb cache dir = 6.8 x 10 = 68 MB + 10 MB(cache_mem) + additional 10-20 MB = 98 MB ... and to have at least twice so 98 x 2 = 196 MB ... I have 460 MB free before I start squid.... so that is 4 times more than recommended minimal amount..... Top shows squid is only using 50-60 Mb ... And if I shut down squid only 60 Mb gets freed ... I will add additional 128 RAM and see the result ... but I doubt that it will help .. maybe give me 2-5 days of uptime ... > squid maps the cache content to the memory so that it will have a fast > lookup.. > so the more your cache is being used, the more the memory is being used .. > > reduce your cache_dir or increase your memory.. IMHO 512MB is to little .. > > Quoting Edvard Chitro <[EMAIL PROTECTED]>: > >> Hello, >> >> I have serious problems with squid. >> >> My setup is: >> Debian Sarge @ Athlon 750, 512 RAM and 2 SCSI hdd's (one for cache, one >> for system). Kernel is 2.4.31. >> >> Squid Cache: Version 2.5.STABLE13 >> configure options: --prefix=/usr/squid-13/ --with-aufs-threads=10 >> --with-pthreads --enable-storeio=aufs --enable-removal-policies=heap,lru >> --enable-delay-pools --disable-wccp --enable-dlmalloc >> --enable-kill-parent-hack --enable-snmp >> --enable-default-err-language=Lithuanian >> --enable-err-languages=Lithuanian >> --enable-poll --enable-linux-netfilter --disable-ident-lookups >> --disable-hostname-checks --enable-underscores >> >> cache_mem 10 MB >> cache_dir aufs /cache 7168 10 256 >> >> I get ~600 req/s on average. Performance is good .. no lagging etc. ... >> fast response... >> top shows squid is using ~ 60 MB of ram. >> >> My box has 512 ram. It is basically a router with only squid and >> iptables >> firewall on it. >> >> When I start the sistem (without starting squid) only 37 MB of ram gets >> used. And usage is constant, no matter how long box is up. After a week >> it >> still has 37 Mb used and ~400 MB free. >> >> But if I start squid and let it run, then after ~36 hours I have only 92 >> Mb free ... and after 7-30 days I get ether box lockup because out of >> memory or squid becomes zombie and locks up. The most interesting thing >> that swap usage is always remains zero or 132 Kb. Ihave no bad sector on >> hard drives. I have checked everything. That irritates me ... >> >> I have such problems since Stable 9 I think. I have been using Debian >> Woody and thought that it might be gcc 2.95 that causes problems... but >> now I have switched to Debian Sarge with gcc 3.3 and the same problems >> exist. >> >> After 40 hours of uptime I get: >> >> [EMAIL PROTECTED]:~$ free >> total used free shared buffers cached >> Mem: 516312 510772 5540 0 51976 >> 48876 >> -/+ buffers/cache: 409920 106392 >> Swap: 248968 0 248968 >> >> >> >> root 17386 0.0 0.2 4136 1160 ? Ss 10:43 0:00 >> /usr/squid-13/sbin/squid >> squid 31627 2.1 8.9 68640 46044 ? S 10:43 0:29 \_ >> (squid) >> squid 2352 0.0 0.0 1336 280 ? Ss 10:43 0:00 \_ >> (unlinkd) >> squid 17672 0.0 8.9 68640 46044 ? S 10:43 0:00 \_ >> (squid) >> squid 1721 0.0 8.9 68640 46044 ? S 10:43 0:00 >> \_ >> (squid) >> squid 10627 0.0 8.9 68640 46044 ? S 10:43 0:00 >> \_ >> (squid) >> squid 32141 0.0 8.9 68640 46044 ? S 10:43 0:00 >> \_ >> (squid) >> squid 15300 0.0 8.9 68640 46044 ? S 10:43 0:00 >> \_ >> (squid) >> squid 29018 0.0 8.9 68640 46044 ? S 10:43 0:00 >> \_ >> (squid) >> squid 5266 0.0 8.9 68640 46044 ? S 10:43 0:00 >> \_ >> (squid) >> squid 7231 0.0 8.9 68640 46044 ? S 10:43 0:00 >> \_ >> (squid) >> squid 20412 0.0 8.9 68640 46044 ? S 10:43 0:00 >> \_ >> (squid) >> squid 17492 0.0 8.9 68640 46044 ? S 10:43 0:00 >> \_ >> (squid) >> squid 23770 0.0 8.9 68640 46044 ? S 10:43 0:00 >> \_ >> (squid) >> >> >> >> Can somebody help me ? >> >> Last time squid died with something like this in the logs: >> May 14 23:41:09 gw kernel: Unable to handle kernel paging request at >> virtual address 30303098 >> May 14 23:41:09 gw kernel: printing eip: >> May 14 23:41:09 gw kernel: c01b0880 >> May 14 23:41:09 gw kernel: *pgd = 0000000000000000 >> May 14 23:41:09 gw kernel: *pmd = 0000000000000000 >> May 14 23:41:09 gw kernel: Oops: 0000 >> May 14 23:41:09 gw kernel: CPU: 0 >> May 14 23:41:09 gw kernel: EIP: >> 0010:[reiserfs_update_inode_transaction+16/48] Not tainted >> May 14 23:41:09 gw kernel: EFLAGS: 00010217 >> May 14 23:41:09 gw kernel: eax: 30303030 ebx: fffffffe ecx: df85fc00 >> edx: dea43d40 >> May 14 23:41:09 gw kernel: esi: dca72500 edi: dea43d40 ebp: c8eabea0 >> esp: c8eabe78 >> May 14 23:41:09 gw kernel: ds: 0018 es: 0018 ss: 0018 >> May 14 23:41:09 gw kernel: Process squid (pid: 24378, >> stackpage=c8eab000) >> May 14 23:41:09 gw kernel: Stack: c0194b09 dea43d40 c5c5761c 00000008 >> c8eabec0 c8eabf00 c8eabf9c 00000020 >> May 14 23:41:09 gw kernel: c8eabfc0 00000000 c026bc5b 00000000 >> 00000026 0029537d df87fc00 00000020 >> May 14 23:41:09 gw kernel: 00005a0f 00000282 00000004 00000000 >> 00000000 00000000 00000000 df4ffe40 >> May 14 23:41:09 gw kernel: Call Trace: [reiserfs_unlink+169/608] >> [generic_fs_handler+62/208] [vfs_unlink+189/400] [sys_unlink+251/384] >> [system_call+51/64] >> May 14 23:41:09 gw kernel: >> May 14 23:41:09 gw kernel: Code: 8b 40 68 89 82 54 01 00 00 8b 81 f8 00 >> 00 >> 00 8b 40 20 89 82 >> > > >
