ons 2009-01-07 klockan 08:46 -0500 skrev vivek...@aol.in: > wccp2_router xxx.xx.xxx.xxx > wccp_version 4 > wccp2_forwarding_method 1 > wccp2_return_method 1 > wccp2_assignment_method 1 > wccp2_service dynamic 80 > wccp2_service_info 80 protocol=tcp flags=src_ip_hash priority=240 > ports=80 > wccp2_service dynamic 90 > wccp2_service_info 90 protocol=tcp flags=dst_ip_hash,ports_source > priority=240 ports=80 > > > Router Eth0 - connected to lan. Eth1 - connecte to squid.
Have you also configured * A loopback address on the router, giving it a easily identified router ID * the required GRE/WCCP tunnel interface on the Squid server * disabled rp_filter on the above GRE/WCCP interface. * And adjusted the REDIRECT/NAT rules to act on traffic received on the GRE/WCCP interface configured above? > Service Identifier: web-cache > Number of Service Group Clients: 1 > Number of Service Group Routers: 1 > Total Packets s/w Redirected: 11336 > Process: 0 > Fast: 0 > CEF: 11336 Looks fine. > Is there any simple way of configuring WCCP. We have beating round the > bush all day long to configure wccp. WCCP as such is configured. But something is missing in the interception at the proxy. Most likely the GRE interface mentioned above. Regards Henrik
