Ah, sorry my mistake, you mean Squid box will be the new default gateway, right? If do so, I have to change default gateway on every computers, it's also like config proxy setting on each PC.
Best regards ~ Neddie On Tue, Dec 6, 2011 at 9:19 PM, Edmonds Namasenda <namase...@gmail.com> wrote: > Your diagram or illustration shows a difference with my illustration. > If you believe they are the same and getting header fields shown, look > through your firewall and squid acls. > > # Edz. > > On Tue, Dec 6, 2011 at 5:05 PM, Nguyen Hai Nam <nam...@nd24.net> wrote: >> Hi Edmonds, >> >> That's really like my setup right now. But, as Amos said, the traffic >> just pass from eth0 to eth1 but don't come to Squid, because it's >> bridged. Actually, when watching IP nat table, I still found some nat >> rules show up, but at client-side it still looks direct access. And >> more strange, if I use an other linux box from LAN to check out by >> curl -I http://something.com/ it's returned the header fields that has >> "Via: 1.1 (squid 3.2)". I have no idea why. >> >> At this moment, I still don't find more documentation from IPfilter >> for deeper discovery. >> >> ~ Neddie >> >> On Tue, Dec 6, 2011 at 12:03 PM, Edmonds Namasenda <namase...@gmail.com> >> wrote: >>> Hai, >>> Seems your network set-up is what might be ruining your connection >>> expectations or the "default gateway" needs a rule (possibly using a >>> firewall) to direct all HTTP traffic to the squid box rather than to >>> the internet. >>> >>> Otherwise, think of the set-up below (with the Squid box the same as >>> the Gateway) >>> >>> Internet Router >> Eth0 |- Squid box & Default Gateway -| Eth1 >>>>> Switch >> LAN >>> >>> # Edz. >>> >>> On Mon, Dec 5, 2011 at 5:14 PM, Nguyen Hai Nam <nam...@nd24.net> wrote: >>>> -- Best regards, Hai Nam, Nguyen
