hi , i have a problem which is the long log files of squid such as : access.log cache.log store.log
get high sizes like 500 G which cause the squid partition to be full and squid to get down . my question is how to set limit size for log file and if that size exceeded i want new logs to replace the old logs on the same file and not exceed ?? ===================================================== here is my squid.conf file : acl blockkeywords dstdomain "/etc/squid3/squid-porn.acl" http_access deny blockkeywords #################################################### ####################################################################### # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 ################################################################################# # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl mysubnet src xxxxxxxxxxxxxx http_access allow mysubnet ################################################################################### acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT ###################################################### # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager ################################################ # Deny requests to certain unsafe ports http_access deny !Safe_ports ################################################################### # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports ##################################################################### # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost ################################################################## # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # ################################################################### # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost ############################################################## # And finally deny all other access to this proxy http_access deny all ########################################################### # Squid normally listens to port 3128 http_port xxxxx http_port xxxx http_port 1xxxx tproxy #http_port xxxx #http_port xxxxx tproxy ########################################################### # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? ############################################################### # Uncomment and adjust the following to add a disk cache directory. cache_dir aufs /cache1 150000 32 256 cache_dir aufs /cache2 150000 32 256 cache_dir aufs /cache3 150000 32 256 #cache_dir ufs /var/spool/squid3 100 16 256 ########################################################### # Leave coredumps in the first cache dir coredump_dir /var/spool/squid ############################################################### # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 ############################################################### cache_mem 500 MB ########### WCCP2 Config############# wccp2_router xxxxxxxxxxxxx wccp_version 2 wccp2_forwarding_method 2 wccp2_return_method 2 wccp2_service dynamic 80 wccp2_service_info 80 protocol=tcp flags=src_ip_hash priority=240 ports=80 wccp2_service dynamic 90 wccp2_service_info 90 protocol=tcp flags=dst_ip_hash,ports_source priority=240 ports=80 ################################################################### dns_nameservers x.x.x.x cache_effective_user virus cache_effective_group virus visible_hostname virus ########################################## memory_replacement_policy heap GDSF cache_replacement_policy heap LFUDA maximum_object_size_in_memory 64 KB ########################################### max_filedescriptors 65536 max_open_disk_fds 65536 ############################### ################################ cache_swap_low 98 cache_swap_high 99 =============================== cache_store_log /var/log/squid/store.log regards -- View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/big-log-files-cache-log-cause-squid-to-get-down-tp4659395.html Sent from the Squid - Users mailing list archive at Nabble.com.
