Hello Richard,
Good morning and thank you for your reply. As you suggested, I compiled
with mr12.5 and no luck. Please find the attached file for the error log.
Please advise me to move forward and thank you in advance.
Best regards,
Chandramouli.
On Tue, Sep 16, 2025 at 7:54 PM Richard Fuchs via sr-users <
[email protected]> wrote:
> Use the LTS branch mr12.5. It has the required PIE flags included.
>
> Cheers
>
>
> On 15/09/2025 11.43, Chandramouli P via sr-users wrote:
>
> Hello Sergy,
>
> Good morning and thank you for your reply. Somehow, I wasn't able to login
> to my pastebin account. Please find the error that I am getting in the
> attached file. Thank you.
>
> Best regards,
> Chandramouli.
>
> On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov <[email protected]>
> wrote:
>
>> Pastebin is no available more.
>> Please post again.
>>
>> On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
>>
>> Hello Sergey,
>>
>> Good morning and thank you for your reply. As you suggested, I tried to
>> compile the mr12.4 version and getting the below error:
>>
>> *https://pastebin.com/fc54vv9T <https://pastebin.com/fc54vv9T>*
>>
>> Please advise me to move forward and thank you in advance.
>>
>> Best Regards,
>> Chandramouli.
>>
>>
>>
>>
>>
>> On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov <[email protected]>
>> wrote:
>>
>> Looks like you're trying to build the master branch
>> I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on
>> CentOS 8
>> Probably this should also work for Rocky 8
>> After you compile this branch, you can build for a more recent branch.
>>
>>
>> On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users <
>> [email protected]> wrote:
>>
>> Hello Alex,
>>
>> Good morning and thank you for your reply. As you suggested, I followed
>> and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting
>> errors.
>>
>> Please find the installation steps that I followed here:
>> *https://pastebin.com/wi4YtbKZ
>> <https://pastebin.com/wi4YtbKZ>*
>>
>> Please find the complete error description here:
>> *https://pastebin.com/LbgYQMGb
>> <https://pastebin.com/LbgYQMGb>*
>>
>> Please advise me to move forward and thank you in advance.
>>
>> Best Regards,
>> Chandramouli.
>>
>>
>>
>> On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov <[email protected]>
>> wrote:
>>
>> It would be hard to share a step-by-step guide as I don't have one handy
>> and it would be labourious to set up a fresh host for the express purpose
>> of writing one for you, but I do this routinely on EL8 and Rocky 8, and
>> have done so dozens of times.
>>
>> Tips:
>>
>> - You will need EPEL.
>>
>> - You will need the CBR repository or whatever has replaced PowerTools in
>> Rocky 8.
>>
>> Otherwise, it's just installing the dependencies until you get there.
>>
>> -- Alex
>>
>> > On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
>> [email protected]> wrote:
>> >
>> > Hello,
>> >
>> > I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
>> Linux 8.x also using different sources. But, I am facing a lot of issues
>> like libraries issues, dependencies issues, conflict issues etc. Anyone
>> successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on
>> CentOS)? If so, could you please share the documentation step-by-step or
>> web URL? Thanks in advance.
>> >
>> > Best regards,
>> > Chandramouli.
>> > __________________________________________________________
>> > Kamailio - Users Mailing List - Non Commercial Discussions --
>> [email protected]
>> > To unsubscribe send an email to [email protected]
>> > Important: keep the mailing list in the recipients, do not reply only
>> to the sender!
>>
>> --
>> Alex Balashov
>> Principal Consultant
>> Evariste Systems LLC
>> Web: https://evaristesys.com, https://www.csrpswitch.com
>> Tel: +1-706-510-6800
>>
>> __________________________________________________________
>> Kamailio - Users Mailing List - Non Commercial Discussions --
>> [email protected]
>> To unsubscribe send an email to [email protected]
>> Important: keep the mailing list in the recipients, do not reply only to
>> the sender!
>>
>>
>>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions --
> [email protected]
> To unsubscribe send an email to [email protected]
> Important: keep the mailing list in the recipients, do not reply only to the
> sender!
>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions --
> [email protected]
> To unsubscribe send an email to [email protected]
> Important: keep the mailing list in the recipients, do not reply only to
> the sender!
>
{\rtf1\ansi\ansicpg1252\cocoartf2822
\cocoatextscaling0\cocoaplatform0{\fonttbl\f0\fnil\fcharset0 Menlo-Regular;\f1\fnil\fcharset0 Menlo-Bold;}
{\colortbl;\red255\green255\blue255;\red0\green0\blue0;\red180\green36\blue25;\red46\green174\blue187;
}
{\*\expandedcolortbl;;\csgray\c0;\cssrgb\c76411\c21697\c12527;\cssrgb\c20199\c73241\c78251;
}
\paperw11900\paperh16840\margl1440\margr1440\vieww28600\viewh14580\viewkind0
\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\pardirnatural\partightenfactor0
\f0\fs30 \cf2 \CocoaLigature0 cd rtpengine\
git checkout mr12.5\
git status\
On branch mr12.5\
Your branch is up to date with 'origin/mr12.5'.\
\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\pardirnatural\partightenfactor0
cd daemon\
make\
*******************\
*******************\
( echo '/******** GENERATED FILE ********/' && \\\
echo '#line 1' && \\\
cat ../lib/"socket.c" ) > "socket.c"\
cc -g -Wall -Wextra -Wno-sign-compare -Wno-unused-parameter -Wstrict-prototypes -Werror=return-type -Wshadow -pthread -fno-strict-aliasing -std=c11 -I. -I../kernel-module/ -I../lib/ -I../include/ -D_GNU_SOURCE -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -pthread -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -pthread -DPCRE2_CODE_UNIT_WIDTH=8 -I/usr/include/json-glib-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -pthread -DWITHOUT_CODECLIB -DHAVE_MQTT -DRTPENGINE_VERSION="\\"git-mr12.5-738a26f0\\"" -DHAVE_LIBSYSTEMD -O3 -flto=auto -ffat-lto-objects -fPIE -c -o socket.o socket.c\
In file included from
\f1\b socket.c:1
\f0\b0 :\
\f1\b socket.c:
\f0\b0 In function \'91
\f1\b __ip_recvfrom_options
\f0\b0 \'92:\
\f1\b ../lib/socket.h:225:31:
\f0\b0
\f1\b \cf3 error:
\f0\b0 \cf2 \'91
\f1\b SO_TIMESTAMP_OLD
\f0\b0 \'92 undeclared (first use in this function); did you mean \'91
\f1\b SO_TIMESTAMPNS
\f0\b0 \'92?\
else if (cm->cmsg_type ==
\f1\b \cf3 SO_TIMESTAMP_OLD
\f0\b0 \cf2 ) \{ \\\
\f1\b \cf3 ^~~~~~~~~~~~~~~~
\f0\b0 \cf2 \
\f1\b socket.c:341:2:
\f0\b0
\f1\b \cf4 note:
\f0\b0 \cf2 in expansion of macro \'91
\f1\b socket_recvfrom_parse_cmsg
\f0\b0 \'92\
\f1\b \cf4 s->family->sockaddr2endpoi
\f0\b0 \cf2 nt(ep, &sin);\
\f1\b \cf4 ^~~~~~~~~~~~~~~~~~~~~~~~~~
\f0\b0 \cf2 \
\f1\b ../lib/socket.h:225:31:
\f0\b0
\f1\b \cf4 note:
\f0\b0 \cf2 each undeclared identifier is reported only once for each function it appears in\
else if (cm->cmsg_type ==
\f1\b \cf4 SO_TIMESTAMP_OLD
\f0\b0 \cf2 ) \{ \\\
\f1\b \cf4 ^~~~~~~~~~~~~~~~
\f0\b0 \cf2 \
\f1\b socket.c:341:2:
\f0\b0
\f1\b \cf4 note:
\f0\b0 \cf2 in expansion of macro \'91
\f1\b socket_recvfrom_parse_cmsg
\f0\b0 \'92\
\f1\b \cf4 s->family->sockaddr2endpoi
\f0\b0 \cf2 nt(ep, &sin);\
\f1\b \cf4 ^~~~~~~~~~~~~~~~~~~~~~~~~~
\f0\b0 \cf2 \
make: *** [<builtin>: socket.o] Error 1\
}__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions --
[email protected]
To unsubscribe send an email to [email protected]
Important: keep the mailing list in the recipients, do not reply only to the
sender!
