greetings, I have a customer that is sending the REGISTER with 2 ports in the
Contact header:
Contact: <sip:44435661000448...@201.xxx.xxx.xxx:19778:5060>
After some troubleshooting we found that the wireless router is the one
inserting the 2nd port. It is not the SIP UA itself. Is it possible to
"sanitize" the REGISTER at the beginning of the configuration logic with the
TEXTOPS module so that we can leave one port and then process the REGISTERwith
the typical: if (!www_authorize("$fd", "subscriber")){...} Or will this only
applies to messages that are proxied/forwarded (example: received malformed
INVITE, before calling route[1] to send it to the destination sanitize it with
the TEXTOPS functions)I guess my question is: after removing the extra port at
the begining, when I call the "if (!www_authorize("$fd", "subscriber"))",will
it process the modified version or the original one? txs a lot fborot
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
