Txs a lot Reda, I will try it
Although I made a couple of test w/o it and so far it looks like the modified
message is used on the next processing , not the original one but I will keep
testing
From: fbo...@hotmail.com
To: us...@lists.kamailio.org
Subject: Question about processing of packet
Date: Thu, 12 Apr 2012 17:45:44 -0400
greetings,
I have a customer that is sending the REGISTER with 2 ports in the Contact
header:
Contact: <sip:44435661000448...@201.xxx.xxx.xxx:19778:5060>
After some troubleshooting we found that the wireless router is the one
inserting the 2nd port. It is not the SIP UA itself.
Is it possible to "sanitize" the REGISTER at the beginning of the configuration
logic with the TEXTOPS module so that we can leave one port and then process
the REGISTER
with the typical:
if (!www_authorize("$fd", "subscriber"))
{...}
Or will this only applies to messages that are proxied/forwarded (example:
received malformed INVITE, before calling route[1] to send it to the
destination sanitize it with the TEXTOPS functions)
I guess my question is: after removing the extra port at the begining, when I
call the "if (!www_authorize("$fd", "subscriber"))",
will it process the modified version or the original one?
txs a lot
fborot
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
