Hi,
On 04/22/2013 07:34 PM, Daniel-Constantin Mierla wrote:
Details about going out can be printed on onsend_route. In this route
block, one can execute drop and nothing is sent to the wire. It can be a
config started with a special define specified with -A parameter.
Enabling debugger module with cfg trace should give valuable information
about what has been executed from config.
From what Andreas suggesting, printing the value of variables as they
are assigned is missing, probably can be added by hooking in the
interpreter when doing the assignment operation.
Grouping all above under some global/command line parameter can be
useful to make it easier to do a dry run.
Alright, thanks, so there seem to be some possibilities to do what I
want. I'm going to check the possible options (debugger, onsend-route
with drop, passing defines on startup to control the behaviour without
changing the config between real operations and dry runs) and will
provide some findings and proof of concepts, before digging into
developing missing parts.
Andreas
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
