Hello Daniel,
Here is the output: (gdb) frame 0 #0 0x00007fb6a8964e55 in dlg_clean_run (ti=23317351) at dlg_hash.c:244 244 dlg = dlg->next; (gdb) list 239 { 240 lock_set_get(d_table->locks, d_table->entries[i].lock_idx); 241 dlg = d_table->entries[i].first; 242 while (dlg) { 243 tdlg = dlg; 244 dlg = dlg->next; 245 if(tdlg->state==DLG_STATE_UNCONFIRMED && tdlg->init_ts<tm-300) { 246 /* dialog in early state older than 5min */ 247 LM_NOTICE("dialog in early state is too old (%p ref %d)\n", 248 tdlg, tdlg->ref); (gdb) info locals i = 2087 tm = 1441978496 dlg = 0xb02030a01201001 tdlg = 0xb02030a01201001 __FUNCTION__ = "dlg_clean_run" (gdb) p *dlg Cannot access memory at address 0xb02030a01201001 (gdb) I hope this will help. Regards, Igor. De : Daniel-Constantin Mierla [mailto:mico...@gmail.com] Envoyé : jeudi 17 septembre 2015 11:40 À : Igor Potjevlesch <igor.potjevle...@gmail.com>; 'Kamailio (SER) - Users Mailing List' <sr-users@lists.sip-router.org> Objet : Re: [SR-Users] Multiple crashes of Kamailio 4.2.1 Hello, from the second trace, can you get output for: frame 0 list info locals p *dlg Cheers, Daniel On 11/09/15 18:23, Igor Potjevlesch wrote: Hello Daniel, >From the two crashes occurred today, I got 2 coredump. So I copy/past the result from these 4 backtraces: No privates modules or patches. It's a regular 4.2.3. (gdb) bt full #0 0x00007fb6a8984c0e in remove_dialog_timer_unsafe (tl=0x7fb6978e9060) at dlg_timer.c:156 No locals. #1 0x00007fb6a8985001 in remove_dialog_timer (tl=0x7fb6978e9060) at dlg_timer.c:182 __FUNCTION__ = "remove_dialog_timer" #2 0x00007fb6a8966bb7 in destroy_dlg (dlg=0x7fb6978e9008) at dlg_hash.c:357 ret = 0 var = 0x7fb6976154b0 __FUNCTION__ = "destroy_dlg" #3 0x00007fb6a8967b35 in destroy_dlg_table () at dlg_hash.c:438 dlg = 0xb02030a01201001 l_dlg = 0x7fb6978e9008 i = 2087 __FUNCTION__ = "destroy_dlg_table" #4 0x00007fb6a8933263 in mod_destroy () at dialog.c:783 No locals. #5 0x0000000000590d79 in destroy_modules () at sr_module.c:811 t = 0x7fb6af43d670 foo = 0x7fb6af43d440 __FUNCTION__ = "destroy_modules" #6 0x000000000049bb43 in cleanup (show_status=1) at main.c:569 memlog = 0 __FUNCTION__ = "cleanup" #7 0x000000000049d10b in shutdown_children (sig=15, show_status=1) at main.c:711 __FUNCTION__ = "shutdown_children" #8 0x000000000049f6e1 in handle_sigs () at main.c:802 chld = 0 chld_status = 139 memlog = -1755228944 __FUNCTION__ = "handle_sigs" #9 0x00000000004a6fbf in main_loop () at main.c:1757 i = 8 pid = 4424 si = 0x0 si_desc = "udp receiver child=7 sock=A.B.C.D:5060\000\000\000\000\016\b\000\000\377\177\000\000\260Ta\227\26 6\177\000\000\000\000\000\020\004\000\000\000\260Ta\227\266\177\000\000\060S A\000\000\000\000\000\240\177\207\b\001\000\000\000\060}\207\b\377\177\000\0 00\032dN\000\000\000\000\000h\261@\257z\000\000\000\276}p\000\000\000\000" nrprocs = 8 __FUNCTION__ = "main_loop" #10 0x00000000004ab8bf in main (argc=7, argv=0x7fff08877fa8) at main.c:2578 cfg_stream = 0x18b4010 c = -1 r = 0 tmp = 0x7fff08879f70 "" tmp_len = 0 port = 0 proto = 32767 options = 0x6fcc00 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:" ret = -1 seed = 2249241156 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0xc2 p = 0x7fff08877e7e "" __FUNCTION__ = "main" (gdb) bt full #0 0x00007fb6a8964e55 in dlg_clean_run (ti=23317351) at dlg_hash.c:244 i = 2087 tm = 1441978496 dlg = 0xb02030a01201001 tdlg = 0xb02030a01201001 __FUNCTION__ = "dlg_clean_run" #1 0x00007fb6a8938dd6 in dlg_clean_timer_exec (ticks=23317351, param=0x0) at dialog.c:1260 No locals. #2 0x00000000005fd540 in fork_sync_timer (child_id=-1, desc=0x7fb6a89970f1 "Dialog Clean Timer", make_sock=1, f=0x7fb6a8938dbd <dlg_clean_timer_exec>, param=0x0, interval=90000) at timer_proc.c:235 pid = 0 ts1 = 373077626 ts2 = 90000 #3 0x00007fb6a8932b50 in child_init (rank=0) at dialog.c:740 __FUNCTION__ = "child_init" #4 0x0000000000591129 in init_mod_child (m=0x7fb6af43d670, rank=0) at sr_module.c:921 __FUNCTION__ = "init_mod_child" #5 0x0000000000590e64 in init_mod_child (m=0x7fb6af43e1b0, rank=0) at sr_module.c:918 __FUNCTION__ = "init_mod_child" #6 0x0000000000590e64 in init_mod_child (m=0x7fb6af43e728, rank=0) at sr_module.c:918 __FUNCTION__ = "init_mod_child" #7 0x0000000000590e64 in init_mod_child (m=0x7fb6af43eb90, rank=0) at sr_module.c:918 __FUNCTION__ = "init_mod_child" #8 0x0000000000590e64 in init_mod_child (m=0x7fb6af43f108, rank=0) at sr_module.c:918 __FUNCTION__ = "init_mod_child" #9 0x0000000000590e64 in init_mod_child (m=0x7fb6af43f418, rank=0) at sr_module.c:918 __FUNCTION__ = "init_mod_child" #10 0x0000000000590e64 in init_mod_child (m=0x7fb6af43f808, rank=0) at sr_module.c:918 __FUNCTION__ = "init_mod_child" #11 0x0000000000590e64 in init_mod_child (m=0x7fb6af43fb18, rank=0) at sr_module.c:918 __FUNCTION__ = "init_mod_child" #12 0x0000000000590e64 in init_mod_child (m=0x7fb6af440090, rank=0) at sr_module.c:918 __FUNCTION__ = "init_mod_child" #13 0x0000000000590e64 in init_mod_child (m=0x7fb6af4403d8, rank=0) at sr_module.c:918 __FUNCTION__ = "init_mod_child" #14 0x0000000000591433 in init_child (rank=0) at sr_module.c:947 No locals. #15 0x00000000004a64c4 in main_loop () at main.c:1706 i = 8 pid = 4424 si = 0x0 si_desc = "udp receiver child=7 sock=A.B.C.D:5060\000\000\000\000\016\b\000\000\377\177\000\000\260Ta\227\26 6\177\000\000\000\000\000\020\004\000\000\000\260Ta\227\266\177\000\000\060S A\000\000\000\000\000\240\177\207\b\001\000\000\000\060}\207\b\377\177\000\0 00\032dN\000\000\000\000\000h\261@\257z\000\000\000\276}p\000\000\000\000" nrprocs = 8 __FUNCTION__ = "main_loop" #16 0x00000000004ab8bf in main (argc=7, argv=0x7fff08877fa8) at main.c:2578 cfg_stream = 0x18b4010 c = -1 r = 0 tmp = 0x7fff08879f70 "" tmp_len = 0 port = 0 proto = 32767 options = 0x6fcc00 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:" ret = -1 seed = 2249241156 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0xc2 p = 0x7fff08877e7e "" __FUNCTION__ = "main" -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.com Kamailio Advanced Training, Sep 28-30, 2015, in Berlin - http://asipto.com/u/kat
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users