Hello ,
I'm new to the SSH1 protocol and perhaps someone that had a little bit of
experiance with it could give me some pointers ?
I would like to perform X11 forwarding to one of our Unix Servers , but
it's not working for me.
Here are the steps I took to try to get the X11 forwarding to work on
TTSSH 2.3 using SSH protocol V1.5 :
a). Configure the TTSSH with Forwarding as follows:
Setup > SSH Forwarding > Add
Then Forward Local port 6000 to remote machine #.#.#.# on port 6000.
Then Save those configurations.
b).XDMCP by Query Host, XDMCP by Indirect Host and XDMCP by Broadcast are
the options that you can set in
X-Deep/32 X-Server.
I chose to use XDMCP by Query Host with the XDMCP Hostname = 127.0.0.1
(Thus all the X-Server communication would now be forwarded through the SSH
software on port 6000 /X-Server port to the
IP number pecified #.#.#.# )
c). Now to run any X11 programs all you have to do is execute them at the
SSH command prompt.
In theory this was supose to work, but I don't know what I am doing wrong
perhpas someone who got it to work properly can point out what I should
have done ?
The X-Deep software is good at the at price, compared to Exceed which costs
$490. Does anyone know of any X-Server software for Windows that is
affordable and works great ? I included a couple of the ones I found on
the net, but I hope
someone can recommend one that they feel is a great deal.
Is there a difference in the security of using Exceed Vs. X-Deep if you
will be running it over SSH ?
MI/X 2.0 X-Server - $25
http://www.microimages.com/www/html/mix/
Exceed X-Server - $490
http://www.unipress.com/hbird/exceed/
How to setup X forwarding?
X-Deep X-Server - $49
http://www.pexus.com/Product_Information/product_information.html
HOBLink X-Server $175
http://www.hob.de/www_us/produkte/connect/jwt.htm
Thanks.
