> a). Configure the TTSSH with Forwarding as follows:
> Setup > SSH Forwarding > Add
> Then Forward Local port 6000 to remote machine #.#.#.# on port 6000.
> Then Save those configurations.
Remove the Port forwarding line and click on the X Forwarding box (Display
remote X application on local X server).
Reinstall your X-Deep/32 X-Server without adding your configuration
options. After you start up your X-server, start up TTSSH and log into
a server with an X server installed. Type xterm and see if an xterm
shows up on the X server. We use MI/X, you can try it free for 15 days.
Michael Hulet
Network System Administrator
ITTC, University of Kansas
On Thu, 30 Mar 2000, asosin wrote:
> Hello ,
>
>
> I'm new to the SSH1 protocol and perhaps someone that had a little bit of
> experiance with it could give me some pointers ?
> I would like to perform X11 forwarding to one of our Unix Servers , but
> it's not working for me.
>
> Here are the steps I took to try to get the X11 forwarding to work on
> TTSSH 2.3 using SSH protocol V1.5 :
>
> a). Configure the TTSSH with Forwarding as follows:
> Setup > SSH Forwarding > Add
> Then Forward Local port 6000 to remote machine #.#.#.# on port 6000.
> Then Save those configurations.
>
> b).XDMCP by Query Host, XDMCP by Indirect Host and XDMCP by Broadcast are
> the options that you can set in
> X-Deep/32 X-Server.
> I chose to use XDMCP by Query Host with the XDMCP Hostname = 127.0.0.1
> (Thus all the X-Server communication would now be forwarded through the SSH
> software on port 6000 /X-Server port to the
> IP number pecified #.#.#.# )
>
> c). Now to run any X11 programs all you have to do is execute them at the
> SSH command prompt.
>
> In theory this was supose to work, but I don't know what I am doing wrong
> perhpas someone who got it to work properly can point out what I should
> have done ?
>
> The X-Deep software is good at the at price, compared to Exceed which costs
> $490. Does anyone know of any X-Server software for Windows that is
> affordable and works great ? I included a couple of the ones I found on
> the net, but I hope
> someone can recommend one that they feel is a great deal.
> Is there a difference in the security of using Exceed Vs. X-Deep if you
> will be running it over SSH ?
>
>
> MI/X 2.0 X-Server - $25
> http://www.microimages.com/www/html/mix/
>
> Exceed X-Server - $490
> http://www.unipress.com/hbird/exceed/
> How to setup X forwarding?
>
> X-Deep X-Server - $49
> http://www.pexus.com/Product_Information/product_information.html
>
> HOBLink X-Server $175
> http://www.hob.de/www_us/produkte/connect/jwt.htm
>
> Thanks.
>
