Harry Wade wrote: > > > Typical 45% silver solder flows at about 1150°F. If I didn't feel that > "nothing is impossible" I would say that it would be impossible for the > silver solder in a conventionally fired Ga1 boiler to be melted merely from > the heat of the fire. > I found some steam tables online. Though, they only go up to 705 degrees F. Steam at that temperature is upwards of 3,000 PSI.
- Re: soft solder joints (was Harris book) trotfox
- Re: soft solder joints (was Harris book) Harry Wade
- Re: soft solder joints (was Harris book) Harry Wade
- Re: soft solder joints (was Harris book) trotfox
- Re: soft solder joints (was Harris book) Harry Wade
- Re: soft solder joints (was Harris book) VR Bass
- Re: soft solder joints (was Harris book) Keith Manison
- Re: soft solder joints (was Harris book) VR Bass
- Re: soft solder joints (was Harris book) Harry Wade
- Re: soft solder joints (was Harris book) claude2cv
- Re: soft solder joints (was Harris book) Paul Anderson
- Re: soft solder joints (was Harris book) Sam Evans
- Re: soft solder joints (was Harris book) Sam Evans
- Re: soft solder joints (was Harris book) Sam Evans
- Re: soft solder joints (was Harris book) Keith Taylor
- Re: soft solder joints (was Harris book) Gary
- Re: soft solder joints (was Harris book) trotfox
- Re: soft solder joints (was Harris book) Keith Taylor
- Re: soft solder joints (was Harris book) Harry Wade