My "ancient" copy (1961 edition) of the American Society of Metals 
Handbook, Vol 1. describes the dezincification of brass as:

"Copper-zinc alloys containing more than 15% zinc are susceptible to a 
corrosion process called dezincification.  This type of corrosion does 
not occur in aluminum bronze and cupro-nickel, because they do not 
contain zinc.  The initial attack is followed by a secondary reaction in 
which the copper in the corrosion product is redeposited in a porous,  
friable and weak mass on the metal surface.  Corrosion of a similar 
nature continues beneath the primary deposit of copper, resulting in a 
gradual replacement of sound metal by weakened porous copper.   Action 
of this kind, unless arrested, eventually penetrates the metal, 
weakening it structurally and resulting in leakage of liquids or gasses 
through the porous layer....the dezincification usually occurs when 
brasses are in contact with waters that have high oxygen and carbon 
dioxide content....dezincification is not usually a serious problem 
since red brass, admiralty and aluminum brass containing inhibitors of 
dezincification can be used where this form of corrosion has been 
experienced or is anticipated."

This indicates that brass with less than 15% zinc isn't a problem in our 
applications in live steam boilers.  McMaster-Carr 
(http://www.mcmaster.com/) lists a number of bronze and brass shapes for 
pretty reasonable prices that could be easily machined and safely used.
_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to