Yes my list of projects is as scattered as the inner workings of my
mind. I could relate to you how I got from my C-16 timing issues to my
upcoming Ruby-German mining loco bash to boiler and pickling questions,
but it could over flow your inbox.

ANYHOW, I got one of those Chinese 7x12 lathes for Christmas. For my
first actual project (after doing some test turning with some scrap
steel and brass laying around) I decided to finish turning some AMS
axles to retro fit ball bearings. What used to take my three days with a
rickety cross slide vise and my drill press took me an afternoon
(including setup!) with WAY more accurate results. (read this as 'Happy
Camper')

For my second project I'd like to attempt to build a clack valve to
attach to the backhead fitting of my C-16. First I will need to learn
how to use my lathe to cut threads (M5x0.5), that might take some time.

The question is the clack valve body. Most of the stuff I've seen (full
scale) is a type of swing valve or flap valve. I'm guessing I should be
able to use a stainless ball and spring. Is this a good guess? Or do I
need some type of plunger? Any suggestions? Anyone have drawings or
plans I might be able to adapt?

I'm not wanting to go into business, I'm just needing some actual
project of something I plan to use so that I'm not just aimlessly making
chips.


Thanks,
Dave Orwig
Virginia Beach
_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to