Hello Geoff,

Saturday, February 23, 2008, 10:46:00 PM, you wrote:

>>Hi  Bert,

> You  have certainly  warmed up the boilers of the 
> list- good job-- we are alive! Thanks for the 
> additional info on Sinsheim. I suppose my 3-1/2" 
> gauge would not be very popular there. I cannot 
> understand that as a lift is not required as 
> most can be carried and my Britannia can haul six 
> passengers with no problems and the passenger 
> cars have not turned over in the 8 years I have 
> owned it- any way I have now installed third rail 
> for 4-3/4' gauge   as a  safety measure.

>   I am a happy owner of a Regner Vincent, a 
> wonderful little loco- powerful with long runs. 
> In the current edition of SITG our Guru Arthur 
> Cohen ( are you there Arthur?)  wrote a letter 
> pointing out that the chain  tension wheel was 
> incorrectly designed to be  on the power  or load 
> side of the chain drive and he described how he 
> changed it. Of course, he is right- BUT - Arthur, 
> I like to steam my Vincent in reverse much of the 
> time so now we need a lever to change the tension 
> wheel from forward to reverse!! So go to the 
> drawing board Arthur!

> As for Garden Railway clubs, I enjoyed the input 
> from the list- we are fortunate in that we only 
> have about 15 hard core members, a third of us 
> being steamers,   and most also spark, so we 
> don't have any problems at all. Battery power is 
> becoming more popular. I am limited  steaming my 
> favorite Brit passenger locos as there is no 
> track that has radii as large as 10 feet except 
> mine. That's OK with me as  I take a track or 
> battery fired loco, or  steam the Vincent or 
> Cricket.  The Aristocraft Mikado interested the 
> sparkies a great deal because of the R.C and 
> cost- however no member has bought one yet 
> (except me) and I think that is because my track 
> is the only one to  safely accommodate it.

> Geoff.

>>
>>>>Hi Geoff,
>>>>
>>>>I'm pleased to see that at least one person is alive and well.
>>>>Thanks for your answer.  Sinsheim was, as usual Great for the 5" and
>>>>71/4" gauge fans. I get the feeling that gauge one is going downhill
>>>>somewhat.  On the other hand people like Manfred Regner are selling
>>>>woblers like hot buns.  Accucraft is not doing so good in Europe with
>>>>US models, probably because the importers have to pay more for their
>>>>models than customers do when they buy at US discounters. This brings
>>>>with it problems. No dealer is going to do any guarantee work on
>>>>engines imported privatly.  Frankly I understand the dealers here.
>>>>The loosers are the customers and eventually Accucraft because many
>>>>modelers are loosing faith. I know a guy who has 2 electric engines
>>>>with troubles, he bought at a US discounter. The discounter says send
>>>>them to the manufacturer for repair. Post one way is about $500.00
>>>>each. So he is not happy. My Climax "Chicken shed" has had her body
>>>>removed and is now cut down to a "cabriole" sort of loco. The up side
>>>>is you can see the engine working.
>>>>
>>>>No I have not ordered a KIII. At least not yet. She is a great eye
>>>>catcher. I hear that Hr Schug has had a series of cars built to go
>>>>with the loco. I cant wait to see them.
>>>>
>>>>Have fun
>>>>
>>>>Bert
>>
>>Hello David,
>>
>>Friday, February 22, 2008, 3:24:55 PM, you wrote:
>>
>>>  Bert, now I'm on the reverse side of that. I'm under the impression that
>>>  NO IIIK will be sold through the US dealer / distributor system. So not
>>>  only do I have to absorb the cost of the shipment to Germany, I would
>>>  then have to pay to have it shipped to the US AND pay for the exchange
>>>  of currency. I was hoping they would do something like the IK, then the
>>>  price would most likely fall within (or very close to) my limit for live
>>>  steam lok purchases. It would make a beautiful and very different lok
>>>  for people to see at many of the steamups I attend. It would also make a
>>>  great addition to my growing stable of German engines. Having to
>>>  purchase directly from Hr Shug has placed this wonderful lok beyond my
>>>  financial reach. So I'll be saving my ducats for the proposed Accucraft
>>  > Climax.
>>
>>>  I do have a couple of Manfred's wobblers, and I have my eye on the
>>>  Vincent right now, and you are correct about guarantee work. There are
>>>  those who choose to buy the engines directly from Regner and not through
>>>  Ken Johnson's Train Department. I know Ken stocks a lot of parts to
>>>  provide warranty work, and he might be somewhat hesitant to service a
>>>  lok that was not purchased through the Train Department. He does however
>>>  like going the extra mile to help anyone who runs Regner engines,
>>
>>>  As far as gauge one is concerned my feeling is that it is growing here
>>>  in the US and I believe Manfred's wobblers along with the Accucraft Ruby
>>>  have had a lot to do with it. We do need a good selection of engines
>>>  under the $1000 dollar mark, that number is inline with an electric
>>>  gauge one engine that includes sound, remote control and batteries. I
>>>  participated in a train show that historically has been 100% electric.
>>>  We built a elevated steam track and had two tracks running both Saturday
>>>  and Sunday, and the reaction of the crowd was amazing. Most didn't even
>>>  know that engines this small could run on live steam. Some thought that
>>>  the butane was merely a compressed gas propellant. Can you picture the
>>>  faces of these people when I opened the smokebox door and the saw a blue
>>>  flame inside! Lighting off was even better; I would open the fuel valve
>>>  a little more than normal (being careful to not create a fireball,
>>>  although the kids loved that!) and then they really could see a little
>>>  bit of fire.
>>
>>>  For all you lurkers out there who have access to a portable track,
>>>  "Worlds Greatest Hobby on Tour", "Greenberg Train Show" and "Great Train
>>>  Expo" are now very receptive to live steam. Just don't invite people to
>>>  run who might be hazardous to the general public.
>>
>>  > Sorry for the diatribe, but I love this stuff.
>>
>>  Dave Orwig

>>
>>
>>>  _______________________________________________
>>>  SSLiveSteam mailing list
>>>  Send messages: [email protected]
>>>  Cancel subscription:
>>>  http://postfix.45mm.com/mailman/listinfo/sslivesteam
>>>  Rules: http://www.45mm.com/sslivesteam_guide.html
>>
>>
>>I think we need to understand that most dealers are quite small and
>>to have a loco on the shelf for a year is "dead money". On the other
>>hand the discounters allow us to buy steam engines at a considerably
>>reduced price. I do know that Hr Schug and Ian Pierce only deal in
>>railways and do not have a larger business to support the "Steam
>>trains" dept. We also have the dilema of the sinking value of the
>>US$ which meens an import from January can be much more expensive than
>>an import in June but the importer still has to sell them even
>>though the $ has gone down again.
>>
>>I know that Manfred Regner is very very good at sending replacement parts
>>in many cases even though he may be prety sure in some casesthat the
>>owner was responsible for any damage.  I have also had very good service
>>from  Cliff Luscher at Accucraft and can recommend Acucraft locos as being
>>trouble free.
>>
>>  The last couple of weeks have been very mild and the snow has gone
>>  so I took my K-27 out into the garden and was rewarded with a
>>  fantastic plume of steam, It was so good I ran her with the cylinder
>>  drains open just for the effect. 12° C.  My Mich Cal shays N°2 & 5 have
>>  both been fitted with coal/wood tenders and I have now finished the
>>  details. Coupled with the spark arrestor stacks they look completely
>>  different. For me very rewarding for just a little brass bending and
>>  a lick of paint. I also know which is mine without doubt!
>>
>>  Vicky if your reading I know what you mean. Its called "Pensioner
>>  stress"  The standard greeting is "Sorry no time". We spend our
>>  whole life waiting for Retirement. Then when we are there we buy
>>  work!!. I think a psychiatrist should look into this probem.
>>
>>  Well the rain has pulled off and the sun is out again so I'm going
>>  to boil some water and play trains.
>>
>>  Bert
>>
>>--
>>Best regards,
>>  Bert                            mailto:[EMAIL PROTECTED]
>>
>>_______________________________________________
>>SSLiveSteam mailing list
>>Send messages: [email protected]
>>Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
>>Rules: http://www.45mm.com/sslivesteam_guide.html

> _______________________________________________
> SSLiveSteam mailing list
> Send messages: [email protected]
> Cancel subscription:
> http://postfix.45mm.com/mailman/listinfo/sslivesteam
> Rules: http://www.45mm.com/sslivesteam_guide.html


Goef,

I intent pulling Manfred Regner's leg about this in three weeks when I meet
him at a model exhibition in Sinsheim (Sinsheim is a large exhibition
centre in Germany) We will be running our US outline gauge 1 live
steam models. Manfred is a great guy and I am sure he will take it well.
 Like others taking part in the discussions at the
moment I have electric and live steam models. I am building a 5"
Climax "A" live steam  and have just finished 2 off 5" battery
powered engines.
The advantage of the battery power is you break off and have a beer
without having to keep an eye on the water gauge or fire.

There is no 3.5 g track at Sinsheim. It seems not to have cought on
so good in Germany or the European mainland at all. In the UK there
are a lot of them.

Thanks again for your input.

Look after yourself

best wishes

Bert

-- 
Best regards,
 Bert                            mailto:[EMAIL PROTECTED]

_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to