--- so let's change that with a couple of questions. I built a hydrostatic 
(displacement) oiler for a vertical boiler that I have to test engines that I 
have built or repaired after running them on air, but before I complete the 
assembly. It works but it yaks out most of the oil at the beginning. The hole I 
drilled into the steam supply is too large. Is there a rule of thumb or 
recommended orifice size for our scale locos? (When I drilled it, it just 
looked WAY too small, so I opened it up some.)
 
Second question: What is the best alcohol starter loco that includes the finer 
points of alky loco firing (i.e. blower and all the difficult bits of which I 
am unaware)? I'm thinking that would eliminate pot boilers, but I'm asking for 
opinions here and I know everyone has one.
 
Dave Orwig

 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 3569 bytes
Desc: not available
Url : 
http://postfix.45mm.com/pipermail/sslivesteam/attachments/20080821/83be9de9/attachment.bin
_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to