Dave,
I think what you made is properly called a "dead leg" lubricator. A true
"Hydrostatic" has the ability to regulate the feed. You can approach that
even with a dead leg or Roscoe type lubricator by putting a screw valve in
the steam line that allows you to regulate the amount of steam admitted to
the lubricator and hence the amount of oil displaced. You can find drawings
for these little fellows in LBSC's book "Shops, Shed and Road" (also known
in later additions as "The Live Steam Book.") This is an indispensable book
for any live steamer in any scale. It is filled with notes on pumps, check
valves, lubricators, drifting valves, baker valve gear and just gobs and
gobs of valuable accessories for live steam locomotives.
Keith

> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:sslivesteam-
> [EMAIL PROTECTED] On Behalf Of David B. Orwig
> Sent: Thursday, August 21, 2008 9:08 AM
> To: Small-scale live steam discussions
> Subject: [SSLiveSteam] We don't talk anymore---
> 
> --- so let's change that with a couple of questions. I built a hydrostatic
(displacement) oiler
> for a vertical boiler that I have to test engines that I have built or
repaired after running them
> on air, but before I complete the assembly. It works but it yaks out most
of the oil at the
> beginning. The hole I drilled into the steam supply is too large. Is there
a rule of thumb or
> recommended orifice size for our scale locos? (When I drilled it, it just
looked WAY too
> small, so I opened it up some.)
> 
> Second question: What is the best alcohol starter loco that includes the
finer points of alky
> loco firing (i.e. blower and all the difficult bits of which I am
unaware)? I'm thinking that
> would eliminate pot boilers, but I'm asking for opinions here and I know
everyone has one.
> 
> Dave Orwig
> 
> 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: not available
> Type: application/ms-tnef
> Size: 3569 bytes
> Desc: not available
> Url :
>
http://postfix.45mm.com/pipermail/sslivesteam/attachments/20080821/83be9de9/
attachment.
> bin
> _______________________________________________
> SSLiveSteam mailing list
> Send messages: [email protected]
> Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
> Rules: http://www.45mm.com/sslivesteam_guide.html

_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to