Jack, It wasn't me that posted online any recent info about a Billy conversion. If you remember where you saw it and can send the link I'd appreciate it. Always curious about others' ideas.
Ron Brown has been kind enough to print in the latest "Steam in the Garden" magazine the first installment of an article about my Billy alcohol conversion. That article will have drawings, photos, and text about how I did it. As I said before I will adapt a number of ideas from the Billy alcohol conversion for the coal conversion. The alcohol conversion was designed to use the existing boiler and to make as few structural changes as possible. A coal-fired boiler is a completely different proposition. I've really been dragging my feet on the coal-fired project 'cause there are so many details to work out. So far I've got the axle pump made and installed (although I'm tempted to rework the design a bit) and doped out most of the plumbing details. Billy chassis is built as is the tender frame (but nothing above deck-level yet). I've actually started fabricating the boiler parts. After a lot of studying, scribbling, and calculating, and after finally making up my mind about six different times about the design, I think I've settled on seven 4.5 inch-long quarter-inch ID flues and a grate area of about 1.625 inches by 1.825 inches. This combination seems satisfy all the accepted ratios for flue area to grate area and flue diameter to length, and it will all fit on the Billy chassis. Will use the stock smokebox and borrow several fittings from the stock boiler. I'd be happy to share more details with you, but I recommend that you try to research as much info as possible from other sources. K.N. Harris' book "Model Boilers & Boilermaking" is a must. I've shamelessly taken a ruler and flashlight and done some "field research" on friends' coal-fired locos. The simpler gauge-1 (and 16mm scale) coal-fired boilers that I've looked at don't seem to deviate much from the basic design rules that Harris discusses. I can't speak for the larger gauges where the boiler designs will be more sophisticated and the construction techniques also. Some of the Aster and built-to-order 1/32 scale locos I've looked at seem to follow different design rules for some things, and I am in no way qualified to critique them. Steve Jack, you wrote: " Saw drawings on one of the groups (16mm?) for an alcohol conversion of a Billy and mention of a coal fired conversion.Was that you? I have a Billy kit which is only to the point of painting the frames and am interested in your coal fired conversion ideas. The Lord has blessed us with a "true Indian summer this year so have been finishing platform work on the hi- speed line outside before winter really hits, so the modelling has ceased until the snow flies in earnest.So as winter approaches, a coal fired Billy project is quite appealing--this would be an absolute beginners first project conversion for me so I would be the caboose. Any chance as you build to share ideas as you go foreward? I'd like to try a parallel effort." "Jack Damrath" -------------- next part -------------- An HTML attachment was scrubbed... URL: http://postfix.45mm.com/pipermail/sslivesteam/attachments/20081101/bd94381f/attachment.html _______________________________________________ SSLiveSteam mailing list Send messages: [email protected] Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam Rules: http://www.45mm.com/sslivesteam_guide.html
