>  Steve,

>I really  enjoyed your article in SiTG knowing how much effort you 
>put into the Billy conversion. I am also happy it has inspired Kevin 
>to break out his wallet  and subsribe to SiTG,- man I bet the moths 
>swarmed out! See, another conversion for you.


Hic! - more alcohol!

Geoff.




>Hey Steve,
>
>Well now, I've got a very good reason to resubscribe to SitG..(Not that
>there wasn't always a good reason, other than I've got too many magazines
>coming in and not enough time to read them)...  Good for you on the
>publication of your works.
>
>I'll look forward to seeing the full installment.  Take care mate.
>
>Cheers,
>Kevin
>
>----- Original Message -----
>From: "Steve Shyvers" <[EMAIL PROTECTED]>
>To: "Small-scale live steam discussions" <[email protected]>
>Sent: Saturday, November 01, 2008 8:19 AM
>Subject: [SSLiveSteam] Billy Conversion
>
>
>>  Jack,
>>
>>  It wasn't me that posted online any recent info about a Billy conversion.
>>  If
>>  you remember where you saw it and can send the link I'd appreciate it.
>>  Always curious about others' ideas.
>>
>>  Ron Brown has been kind enough to print in the latest "Steam in the
>>  Garden"
>>  magazine the first installment of an article about my Billy alcohol
>>  conversion. That article will have drawings, photos, and text about how I
>>  did it.
>>
>>  As I said before I will adapt a number of ideas from the Billy alcohol
>>  conversion for the coal conversion. The alcohol conversion was designed to
>>  use the existing boiler and to make as few structural changes as possible.
>>  A
>>  coal-fired boiler is a completely different proposition. I've really been
>>  dragging my feet on the coal-fired project 'cause there are so many
>>  details
>>  to work out.
>>
>>  So far I've got the axle pump made and installed (although I'm tempted to
>>  rework the design a bit) and doped out most of the plumbing details. Billy
>>  chassis is built as is the tender frame (but nothing above deck-level
>>  yet).
>>  I've actually started fabricating the boiler parts. After a lot of
>>  studying,
>>  scribbling, and calculating, and after finally making up my mind about six
>>  different times about the design, I think I've settled on seven 4.5
>>  inch-long quarter-inch ID flues and a grate area of about 1.625 inches by
>>  1.825 inches. This combination seems satisfy all the accepted ratios for
>>  flue area to grate area and flue diameter to length, and it will all fit
>>  on
>>  the Billy chassis. Will use the stock smokebox and borrow several fittings
>>  from the stock boiler.
>>
>>  I'd be happy to share more details with you, but I recommend that you try
>>  to
>>  research as much info as possible from other sources. K.N. Harris' book
>>  "Model Boilers & Boilermaking" is a must. I've shamelessly taken a ruler
>>  and
>>  flashlight and done some "field research" on friends' coal-fired locos.
>>  The
>>  simpler gauge-1 (and 16mm scale) coal-fired boilers that I've looked at
>>  don't seem to deviate much from the basic design rules that Harris
>>  discusses. I can't speak for the larger gauges where the boiler designs
>>  will
>>  be more sophisticated and the construction techniques also. Some of the
>>  Aster and built-to-order 1/32 scale locos I've looked at seem to
>>  follow different design rules for some things, and I am in no way
>>  qualified
>>  to critique them.
>>
>>  Steve
>>
>>  Jack, you wrote:
>>
>>  " Saw drawings on one of the groups (16mm?) for an alcohol conversion of a
>>  Billy and mention of a coal fired conversion.Was that you?
>>  I have a Billy kit which is only to the point of painting the frames and
>>  am
>>  interested in your coal fired conversion ideas.
>>  The Lord has blessed us with a "true Indian summer this year so have been
>>  finishing platform work on the hi- speed line outside before winter really
>>  hits, so the modelling has ceased until the snow flies in earnest.So as
>>  winter approaches, a coal fired Billy project is quite appealing--this
>>  would
>>  be an absolute beginners first project conversion for me so I would be the
>  > caboose.
>>  Any chance as you build to share ideas as you go foreward? I'd like to try
>>  a
>>  parallel effort."
>>
>>  "Jack Damrath"
>>  -------------- next part --------------
>>  An HTML attachment was scrubbed...
>>  URL:
>> 
>>http://postfix.45mm.com/pipermail/sslivesteam/attachments/20081101/bd94381f/attachment.html
>>  _______________________________________________
>>  SSLiveSteam mailing list
>>  Send messages: [email protected]
>>  Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
>>  Rules: http://www.45mm.com/sslivesteam_guide.html
>>
>
>_______________________________________________
>SSLiveSteam mailing list
>Send messages: [email protected]
>Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
>Rules: http://www.45mm.com/sslivesteam_guide.html

_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to