2.6.32-longterm review patch. If anyone has any objections, please let us know.
------------------
From: Douglas Gilbert <dgilb...@interlog.com>
commit 2a350cab9daf9a46322d83b091bb05cf54ccf6ab upstream.
Noticed that when the sysfs interface of the SCSI SES
driver was used to request a fault indication the LED
flashed but the buzzer didn't sound. So it was doing
what REQUEST IDENT (locate) should do.
Changelog:
- fix the setting of REQUEST FAULT for the device slot
and array device slot elements in the enclosure control
diagnostic page
- note the potentially defective code that reads the
FAULT SENSED and FAULT REQUESTED bits from the enclosure
status diagnostic page
The attached patch is against git/scsi-misc-2.6
Signed-off-by: Douglas Gilbert <dgilb...@interlog.com>
Signed-off-by: James Bottomley <jbottom...@parallels.com>
Signed-off-by: Greg Kroah-Hartman <gre...@suse.de>
---
drivers/scsi/ses.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -157,6 +157,10 @@ static unsigned char *ses_get_page2_desc
return NULL;
}
+/* For device slot and array device slot elements, byte 3 bit 6
+ * is "fault sensed" while byte 3 bit 5 is "fault reqstd". As this
+ * code stands these bits are shifted 4 positions right so in
+ * sysfs they will appear as bits 2 and 1 respectively. Strange. */
static void ses_get_fault(struct enclosure_device *edev,
struct enclosure_component *ecomp)
{
@@ -178,7 +182,7 @@ static int ses_set_fault(struct enclosur
/* zero is disabled */
break;
case ENCLOSURE_SETTING_ENABLED:
- desc[2] = 0x02;
+ desc[3] = 0x20;
break;
default:
/* SES doesn't do the SGPIO blink settings */
_______________________________________________
stable mailing list
stable@linux.kernel.org
http://linux.kernel.org/mailman/listinfo/stable
