Hello Francis !
Am 12-May-00 schrieb Francis Labrie:
>
> Hi,
>
>
> I've got a new 3Com U.S.Robotics 56K Voice Pro modem (the grey one with
> the big round speaker on the top) to replace my old ZyXEL Elite 2864.
> I've tried to use the voice capability with STFax, but the recordings
> are bad (low quality with white noise) and STFax seems to have problem
> to initialize the modem, particularly when I try to record my own
> greetings and voice samples.
>
> There are three U.S.Robotics modem init strings in the STFax list and no
> one seems to be the best one for my modem. Should I set up my own init
> string or should I select another one? I can I do that? Can you suggest
> an init string for this modem?
>
> BTW, I've tested this modem with my Windows PC�/ WinFax�Pro and it works
> very well. But I hate WinFax and the Windows environnement and I would
> like use STFax instead.
>
>
> Kind regards,
>
Since it seems we both have the same type of modem (USR 56k Professional
Message), I'm afraid to say welcome to the "club of the unlucky" ;-)
For some kind of first aid, you can try my init string, which works ok so
far (more or less), since I still have to deal with unstable behaviour of
STFax since STFax3.0 till the current v4.1.
Sometimes it recognizes an incoming call and picks up the phone, but maybe
the very next call isn't recognized at all. What to think about that ?!
(and yes ! - I REALLY tried A LOT with different timeouts and the like
...;-)
I am using the original "serial.device"(v43.1) from OS3.5 and the following Init
string so far:
AT&F1&D2X3S0=0+MCA=0
(which is almost identical to STFax's preset for the "US Robotics
Sportster Message Plus")
My modem timeout value is "3" at the moment.
Tell me your experiences ...
maybe you are blessed to have more luck
greetings from Vienna ...
--
Heinz S�SS
------------------------------------------
email: [EMAIL PROTECTED] - ICQ: 18480049
--
STFax Mailing List - http://www.active-net.co.uk/products/stfax
ML-Help: <[EMAIL PROTECTED]>, "HELP" or "LONGINDEX"
ML-Unsubscribe: <[EMAIL PROTECTED]>, "DEL" in mail body
