Hi 

This is in response to your request for info on pneumatic
stone carving tools.

First  I�d like to briefly introduce my self to the
discussion group. My name is Reto Marti and I live and work
in Vancouver B.C. Canada as a stone carver and  stone mason.
I was born and raised in Switzerland where I trained as a
stone technician for six years.

I�ve been working exclusively in hard stone for about 19
years now and have gathered lots of experience with diverse
types of carving tools and other equipment.

Here is some info I hope is going to help you making the
right decisions before you buy.

If you carve in hard stone like granite look for products
from a company called Atlas Copco in Sweden .
Fax # 46-0297-42500 
Tel. # 46-0297-55770

Compared to the Italian Cuturi hammers these products are a
lot more expensive but perform a lot better in hard stones
such as granite and very hard limestone.

Personally I use the Atlas Copco BHV 22 which operates with
a stroke lengths of 30 mm performs with 5000 strokes per
min. and consumes about 1/4 of a cubic meter of air at 6-7
bar pressure for gross reductions (bushing hammer). A very
efficient tool.  I work with the cheaper Cuturi hammers to
do detailed finishing.  Note that it is important not to
exceed the operating pressures specified by the
manufacturer.

I don�t have a direct address for the Italian company but I
can give you a local supplier I frequently use.
Pothier Enterprises LTD.
#4-7187 Honeyman Street
Delta, B.C, Canada V4G  1E2

The logistics for lighter tools are as follows

Medium size Hammer typlically for chisels 15 -20 mm in size
Stroke length 27 mm , Stroke per min. 5600 ,  0.2 m3
/min.air at 6-7 bar of pressure

Small size hammer  0.6- 12 mm
Stroke length 24 mm. Stroke per min. 6500,  0.15 m3/ per
min. at 6-7 bar of pressure

This is data for the Atlas products.The Italian Cuturi
hammers operate in the same range so consider the above info
as a guide only if you inquire about their products.

In closing I would like to wish you good look with your work
and the new  tools and if you  have specific questions
pertaining to tools etc. feel free to drop me a line.

Cheers,  Reto Marti




....................................................................
Learning Stone is hosted free by Spunge.org (http://www.spunge.org).
For list info + help, including subscribe/unsubscribe options,
email message "intro stone" to [EMAIL PROTECTED]


Reply via email to