At 01:08 PM 6/7/99 +0100, Learning Stone wrote:
>From: [EMAIL PROTECTED]
>
>WELCOME BACK!
>
>Anybody out there got any tips for a newcomer to using pneumatic tools?
>Ten years with hand tools only haven't prepared me for this...speed... -
>sculptorman

Lower the air pressure coming out of the compressor- keep it down around 60
psi (sorry, I don't have the metric measurement handy). Most people leave
it full blast out of the compressor, then use the butterfly valve near the
air tool to lower the pressure- that results in heavy pressure inside the
hose, which causes rougher vibration and more erratic tool behavior. Do use
a butterfly valve, perhaps 2 feet up the hose from the tool, for fine
tuning while carving.

Oil the hammer every day, an any time you feel it pulling backwards. (and
then wrap it with a rag so the oil doesn't get on the stone) Hang the hose
from above, generally to a length so the tool just touches the ground. Lots
of people work with the hose draped over their shoulder or hanging on the
ground- it's much harder to do fine work if you do that, as the hose pulls
on the tool.

Hold the tool loosely, let it do the work. Don't force it or squeeze it.

While I do feel it's best to work strictly with the mallet or hand hammer
for a few years first, to learn the stone, afterwards there is no great
moral or spiritual reason not to use the pneumatic hammer. To quote Padre
Thomas McGlynn, a sculptor I knew in Italy 25 years ago, "if Michaelangelo
had the air hammer he would have left twice as many sculptures unfinished".
I find carving with the air hammer to be a fluid, graceful method, it flows
like a fountain pen. When it is oiled properly and the air pressure is
right, it becomes a transparent extension of your intentions and ideas. 

____________________________________
Walter S. Arnold  * [EMAIL PROTECTED] 
Gallery:        http://www.stonecarver.com
NT Fax: http://www.ntfax-faq.com
Gargoyle postcards: http://www.stonecarver.com/postcard.html



....................................................................
Learning Stone is hosted free by Spunge.org (http://www.spunge.org).
For list info + help, including subscribe/unsubscribe options,
email message "intro stone" to [EMAIL PROTECTED]


Reply via email to