I tried with a more simple dive 10 minutes at 40 meters and a slow ascent to surface.
If i change directly setting a number in the gfhight It hangs. It doesnt if i use the up/down buttons If i change gflow it works fine both with up/down buttons or input the number directly :-) ........ > > >> OK, I'm not sure why you think you can't use ean40 as travel gas. Add >> another waypoint for the descent. Change the gas on the first segment to >> ean40. Then it should do the right thing. >> >> What am I missing? >> >> > I check and you are right. It works but... While i was checking i faced a > bug: > 1) start a plan > 2) make a deep dive i used 12/48 ean40 and ean80 for a 100 m depth > 3) just let the planner put the deco stop and then try to change the > GFhight. My subsurface hangs. > > > Roberto >
_______________________________________________ subsurface mailing list subsurface@hohndel.org http://lists.hohndel.org/cgi-bin/mailman/listinfo/subsurface
