Last one and i'm going to sleep! after a dive plan the change of end pressure of the cylinder #1 doesnt have effect. It works on the other cyls if you add some. Have a good nigh!!
Il mercoledì 4 giugno 2014, roberto forini <[email protected]> ha scritto: > Yes i was just writting you to start the calc when focus change. > Do it also in changing cyls. Make all the calcs after focus change. If the > dive is particulary "complex" also changing cylinders takes a lot.... > > I know you both start to hate me!!! ;-) > > Il mercoledì 4 giugno 2014, Dirk Hohndel <[email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');>> ha scritto: > >> On Wed, Jun 04, 2014 at 01:38:56AM +0200, roberto forini wrote: >> > I tried with a more simple dive 10 minutes at 40 meters and a slow >> ascent >> > to surface. >> > >> > If i change directly setting a number in the gfhight It hangs. It >> doesnt if >> > i use the up/down buttons >> > >> > If i change gflow it works fine both with up/down buttons or input the >> > number directly >> >> Again, just a guess... when you change the GFhigh, most likely you removed >> the current value and then replaced it with a new one? So when removing >> the 70 you briefly at the value 7 there. And sadly we re-calculate the >> deco already. And on a deep dive once again this can take a looooong time. >> >> This is a bug and needs to be fixed. We should recalculate when focus >> leaves this field, not for every change... >> >> /D >> >
_______________________________________________ subsurface mailing list [email protected] http://lists.hohndel.org/cgi-bin/mailman/listinfo/subsurface
