2015-09-16 19:43 GMT+02:00 Guido Lerch <guido.le...@gmail.com>: > Hi Dirk > I'll digest this later, I am on the road now. > > I might send you and Linus a special patch that writes down the Uemis and > files to disc. > As said I tested with two computer and both worked fine and fast. > If the download is slow it typically means that we cannot match the log > entries to the dive details and typically you run out of memory with no > results. > My hope is that with that special patch I see how different out dive logs > and dive details are and amend the algorithm. > > > G. Lerch > > > Mittwoch, 16. September 2015 16:34 +0200 von Dirk Hohndel < > d...@hohndel.org>: > > Good morning Guido... > > On Wed, Sep 16, 2015 at 09:02:11AM +0200, Guido Lerch wrote: > > > My results were not as good as Linus' > > > After 8h connected to a charger it finally came back to life. > > > > > > When trying to download (empty dive file, so start from the oldest > dive) > > > it loads the first set of dives and then ping-pongs between details > for #2 > > > and details for #3 back and forth and back and forth until the memory > is > > > full. > > > > This is exactly what happened to me with the old code where the offset > was > > calculated, > > I completely re-did that part and tested it on 2 different Uemis computed > > which worked like a charm. > > That's the problem with trial and error bug fixing / coding. We don't > understand exactly how the two different ids are related. I think they > possibly aren't at all. So you need to figure out the offset by trial and > error. With the three Uemis SDA that I had access to the offset was always > fixed, but I don't even know if that is true. > > Here is the relevant excerpt from the debug log (I can send you the whole > log if you think there's anything else in there that's interesting, but I > don't think there is > > d_u_i after download and parse start 3 end 12 newmax 12 progress 0.19 > ::w req.txt > "n076800000054getDive{90d179077baa3186643ea3d84ac93499{notempty{3{{{" > :tr n0769 (after seeks) > ::t /run/media/hohndel/UEMISSDA/ANS/ANS768.TXT > "1mn{dive{1.0{dive-conditions{1.0{dive-gear{1.0{dive-buddies{1.0{computer_id{int{20719{user_id{int{2{" > :tr n0770 (after seeks) > added > "{dive{1.0{dive-conditions{1.0{dive-gear{1.0{dive-buddies{1.0{computer_id{int{20719{user_id{int{2{object_id{int{3{remote_object_id{int{0{sync_id{int{ > {deleted{bool{false{ctime{ts{2014-05-13T07:24:32{dive_no{int{3{logfilenr{int{5{date{ts{2014-05-13T16:22:53{duration{float{58.000000{depth{int{1466{altitude{int{1005{decoindex{int{-99{consumption{int{12{gas{int{1{water{int{1{divetype{int{0{diveactivity{int{0{training{int{0{conditions{u8Clouds{int{1{u8Deposit{int{1{u8Wind{int{1{u8Waves{int{1{u8Current{int{1{u8" > to buffer - new length 510 > buf |object_id{int{3{remote_object_id{int{0{sync_id{in| > reading details for # > 3 > > {dive{1.0{dive-conditions{1.0{dive-gear{1.0{dive-buddies{1.0{computer_id{int{20719{user_id{int{2{object_id{int{3{remote_object_id{int{0{sync_id{int{ > {deleted{bool{false{ctime{ts{2014-05-13T07:24:32{dive_no{int{3{logfilenr{int{5{date{ts{2014-05-13T16:22:53{duration{float{58.000000{depth{int{1466{altitude{int{1005{decoindex{int{-99{consumption{int{12{gas{int{1{water{int{1{divetype{int{0{diveactivity{int{0{training{int{0{conditions{u8Clouds{int{1{u8Deposit{int{1{u8Wind{int{1{u8Waves{int{1{u8Current{int{1{u8 > ::t /run/media/hohndel/UEMISSDA/ANS/ANS769.TXT > "1meVisibility{int{1{gear{u8DiveSuit{int{0{u8DiveSuitType{int{0{u8SuitThickness{int{0{f32Weight{float" > added > "Visibility{int{1{gear{u8DiveSuit{int{0{u8DiveSuitType{int{0{u8SuitThickness{int{0{f32Weight{float{0.000000{u8BCD{int{0{u8Light{int{0{u8Camera{int{0{u8BottomTankType{int{0{u8TravelTankType{int{0{u8DecoTankType{int{0{u8ScubaSet{int{0{u8Other{string{ > {divespot_id{int{-1{buddies{notes{string{ > {{{{00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" > to buffer - new length 1019 > :r: (null) > ::w req.txt > "n077000000054getDive{90d179077baa3186643ea3d84ac93499{notempty{2{{{" > :tr n0771 (after seeks) > ::t /run/media/hohndel/UEMISSDA/ANS/ANS770.TXT > "1mn{dive{1.0{dive-conditions{1.0{dive-gear{1.0{dive-buddies{1.0{computer_id{int{20719{user_id{int{2{" > :tr n0772 (after seeks) > added > "{dive{1.0{dive-conditions{1.0{dive-gear{1.0{dive-buddies{1.0{computer_id{int{20719{user_id{int{2{object_id{int{2{remote_object_id{int{0{sync_id{int{ > {deleted{bool{false{ctime{ts{2014-05-12T03:39:37{dive_no{int{2{logfilenr{int{4{date{ts{2014-05-12T12:32:36{duration{float{64.000000{depth{int{1718{altitude{int{996{decoindex{int{-52{consumption{int{11{gas{int{1{water{int{1{divetype{int{0{diveactivity{int{0{training{int{0{conditions{u8Clouds{int{1{u8Deposit{int{1{u8Wind{int{1{u8Waves{int{1{u8Current{int{1{u8V" > to buffer - new length 510 > buf |object_id{int{2{remote_object_id{int{0{sync_id{in| > reading details for # > 2 > > {dive{1.0{dive-conditions{1.0{dive-gear{1.0{dive-buddies{1.0{computer_id{int{20719{user_id{int{2{object_id{int{2{remote_object_id{int{0{sync_id{int{ > {deleted{bool{false{ctime{ts{2014-05-12T03:39:37{dive_no{int{2{logfilenr{int{4{date{ts{2014-05-12T12:32:36{duration{float{64.000000{depth{int{1718{altitude{int{996{decoindex{int{-52{consumption{int{11{gas{int{1{water{int{1{divetype{int{0{diveactivity{int{0{training{int{0{conditions{u8Clouds{int{1{u8Deposit{int{1{u8Wind{int{1{u8Waves{int{1{u8Current{int{1{u8V > ::t /run/media/hohndel/UEMISSDA/ANS/ANS771.TXT > "1meisibility{int{1{gear{u8DiveSuit{int{0{u8DiveSuitType{int{0{u8SuitThickness{int{0{f32Weight{float{" > added > "isibility{int{1{gear{u8DiveSuit{int{0{u8DiveSuitType{int{0{u8SuitThickness{int{0{f32Weight{float{0.000000{u8BCD{int{0{u8Light{int{0{u8Camera{int{0{u8BottomTankType{int{0{u8TravelTankType{int{0{u8DecoTankType{int{0{u8ScubaSet{int{0{u8Other{string{ > {divespot_id{int{-1{buddies{notes{string{ > {{{{000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" > to buffer - new length 1019 > :r: (null) > ::w req.txt > "n077200000054getDive{90d179077baa3186643ea3d84ac93499{notempty{3{{{" > :tr n0773 (after seeks) > ::t /run/media/hohndel/UEMISSDA/ANS/ANS772.TXT > "1mn{dive{1.0{dive-conditions{1.0{dive-gear{1.0{dive-buddies{1.0{computer_id{int{20719{user_id{int{2{" > :tr n0774 (after seeks) > added > "{dive{1.0{dive-conditions{1.0{dive-gear{1.0{dive-buddies{1.0{computer_id{int{20719{user_id{int{2{object_id{int{3{remote_object_id{int{0{sync_id{int{ > {deleted{bool{false{ctime{ts{2014-05-13T07:24:32{dive_no{int{3{logfilenr{int{5{date{ts{2014-05-13T16:22:53{duration{float{58.000000{depth{int{1466{altitude{int{1005{decoindex{int{-99{consumption{int{12{gas{int{1{water{int{1{divetype{int{0{diveactivity{int{0{training{int{0{conditions{u8Clouds{int{1{u8Deposit{int{1{u8Wind{int{1{u8Waves{int{1{u8Current{int{1{u8" > to buffer - new length 510 > buf |object_id{int{3{remote_object_id{int{0{sync_id{in| > reading details for # > 3 > > {dive{1.0{dive-conditions{1.0{dive-gear{1.0{dive-buddies{1.0{computer_id{int{20719{user_id{int{2{object_id{int{3{remote_object_id{int{0{sync_id{int{ > {deleted{bool{false{ctime{ts{2014-05-13T07:24:32{dive_no{int{3{logfilenr{int{5{date{ts{2014-05-13T16:22:53{duration{float{58.000000{depth{int{1466{altitude{int{1005{decoindex{int{-99{consumption{int{12{gas{int{1{water{int{1{divetype{int{0{diveactivity{int{0{training{int{0{conditions{u8Clouds{int{1{u8Deposit{int{1{u8Wind{int{1{u8Waves{int{1{u8Current{int{1{u8 > ::t /run/media/hohndel/UEMISSDA/ANS/ANS773.TXT > "1meVisibility{int{1{gear{u8DiveSuit{int{0{u8DiveSuitType{int{0{u8SuitThickness{int{0{f32Weight{float" > added > "Visibility{int{1{gear{u8DiveSuit{int{0{u8DiveSuitType{int{0{u8SuitThickness{int{0{f32Weight{float{0.000000{u8BCD{int{0{u8Light{int{0{u8Camera{int{0{u8BottomTankType{int{0{u8TravelTankType{int{0{u8DecoTankType{int{0{u8ScubaSet{int{0{u8Other{string{ > {divespot_id{int{-1{buddies{notes{string{ > {{{{00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" > to buffer - new length 1019 > :r: (null) > ::w req.txt > "n077400000054getDive{90d179077baa3186643ea3d84ac93499{notempty{2{{{" > > weird debug output, you have logfilenr 5, then logfilenr 4 then again logfilenr 5 .... anyway, I think I understand what the difference is with your and my offset and will send a patch soon.
> > And repeat at nausea. > > > Ca you do me a favour and switch on UEMIS debugging and send me the dump > > files ? This will help me to analyse how your object_id and logfile_nr > > differ from > > mine which will help fixing the matching that obviously doesn't work on > you > > Uemis. > > On this one (I think this is the third one I had, Linus now has the forth > one, the first two are both dead and I returned them to Uemis) the delta > is 2. On one of mine the delta was 0 (that was the first one which lead to > all kinds of unhealthy assumptions in the initial code that I wrote which > worked for basically no one but me :-) ), on the other it was 3 IIRC. I > don't know what it is on Linus' > > > > Cancelling the download from the dialog doesn't appear to work, either. > > > Subsurface is simply hung when doing that. > > > > A bad on my side that I'll fix. > > I saw that you sent a patch for that and another cleanup patch. I will > review the patches (this test was done with yesterday's master) and apply > them unless something seems totally wrong. > > /D > > -- Best regards, Guido
_______________________________________________ subsurface mailing list subsurface@subsurface-divelog.org http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface