Fix obvious spelling mistakes in comments (and one error message). Yes, this is trivial but I saw one while reviewing some of the code and after that decided to run code through some tools.
Signed-off-by: Stephen Hemminger <[email protected]> --- a/subsurface-core/datatrak.c 2015-11-14 10:09:43.967543480 -0800 +++ b/subsurface-core/datatrak.c 2015-11-15 10:04:54.504836973 -0800 @@ -37,7 +37,7 @@ static unsigned char *byte_to_bits(unsig /* * Datatrak stores the date in days since 01-01-1600, while Subsurface uses - * time_t (seconds since 00:00 01-01-1970). Function substracts + * time_t (seconds since 00:00 01-01-1970). Function subtracts * (1970 - 1600) * 365,2425 = 135139,725 to our date variable, getting the * days since Epoch. */ @@ -123,7 +123,7 @@ static struct sample *dtrak_profile(stru } free(byte); - // In commit 5f44fdd setpoint replaced po2, so although this is not necesarily CCR dive ... + // In commit 5f44fdd setpoint replaced po2, so although this is not necessarily CCR dive ... if (is_O2) sample->setpoint.mbar = calculate_depth_to_mbar(sample->depth.mm, dt_dive->surface_pressure, 0) * o2percent / 100; j++; --- a/subsurface-core/device.c 2015-11-14 10:09:43.967543480 -0800 +++ b/subsurface-core/device.c 2015-11-15 10:12:23.738913397 -0800 @@ -85,7 +85,7 @@ static int fill_samples(struct sample *s } /* we have no average depth; instead of making up a random average depth - * we should assume either a PADI recrangular profile (for short and/or + * we should assume either a PADI rectangular profile (for short and/or * shallow dives) or more reasonably a six point profile with a 3 minute * safety stop at 5m */ static void fill_samples_no_avg(struct sample *s, int max_d, int max_t, double slope) @@ -129,7 +129,7 @@ struct divecomputer *fake_dc(struct dive /* * We want to fake the profile so that the average - * depth ends up correct. However, in the absense of + * depth ends up correct. However, in the absence of * a reasonable average, let's just make something * up. Note that 'avg_d == max_d' is _not_ a reasonable * average. --- a/subsurface-core/dive.c 2015-11-14 10:09:43.967543480 -0800 +++ b/subsurface-core/dive.c 2015-11-15 10:11:50.554760014 -0800 @@ -1729,7 +1729,7 @@ int gasmix_distance(const struct gasmix } /* fill_pressures(): Compute partial gas pressures in bar from gasmix and ambient pressures, possibly for OC or CCR, to be - * extended to PSCT. This function does the calculations of gass pressures applicable to a single point on the dive profile. + * extended to PSCT. This function does the calculations of gases pressures applicable to a single point on the dive profile. * The structure "pressures" is used to return calculated gas pressures to the calling software. * Call parameters: po2 = po2 value applicable to the record in calling function * amb_pressure = ambient pressure applicable to the record in calling function @@ -2245,7 +2245,7 @@ static bool new_without_trip(struct dive * * - dive computers with "relative datestamps" (ie the dive * computer doesn't actually record an absolute date at all, - * but instead at download-time syncronizes its internal + * but instead at download-time synchronizes its internal * time with real-time on the downloading computer) * * - using multiple dive computers with different real time on @@ -2799,15 +2799,15 @@ int count_dives_with_suit(const char *su * are merged into one longer dive, because the user asked for it * in the divelist. * - * Because this case is with teh same dive computer, we *know* the + * Because this case is with the same dive computer, we *know* the * two must have a different start time, and "offset" is the relative * time difference between the two. * - * (a) two different dive computers that we migth want to merge into + * (a) two different dive computers that we might want to merge into * one single dive with multiple dive computers. * * This is the "try_to_merge()" case, which will have offset == 0, - * even if the dive times migth be different. + * even if the dive times moth be different. */ struct dive *merge_dives(struct dive *a, struct dive *b, int offset, bool prefer_downloaded) { @@ -3054,7 +3054,7 @@ int split_dive(struct dive *dive) continue; } - // Goind down again? We want at least a minute from + // Going down again? We want at least a minute from // the surface start. if (!surface_start) continue; --- a/subsurface-core/ostctools.c 2015-11-14 10:09:43.967543480 -0800 +++ b/subsurface-core/ostctools.c 2015-11-15 10:05:46.801078696 -0800 @@ -59,7 +59,7 @@ static int ostc_prepare_data(int data_mo /* * OSTCTools stores the raw dive data in heavily padded files, one dive - * each file. So it's not necesary to iterate once and again on a parsing + * each file. So it's not necessary to iterate once and again on a parsing * function. Actually there's only one kind of archive for every DC model. */ void ostctools_import(const char *file, struct dive_table *divetable) --- a/subsurface-core/uemis-downloader.c 2015-11-14 10:09:43.971543498 -0800 +++ b/subsurface-core/uemis-downloader.c 2015-11-15 10:09:39.986156509 -0800 @@ -289,7 +289,7 @@ static void str_append_with_delim(char * snprintf(s + len, BUFLEN - len, "%s{", t); } -/* The communication protocoll with the DC is truly funky. +/* The communication protocol with the DC is truly funky. * After you write your request to the req.txt file you call this function. * It writes the number of the next ANS file at the beginning of the req.txt * file (prefixed by 'n' or 'r') and then again at the very end of it, after @@ -330,7 +330,7 @@ static char *next_token(char **buf) return q; } -/* poor man's tokenizer that understands a quoted delimter ('{') */ +/* poor man's tokenizer that understands a quoted delimiter ('{') */ static char *next_segment(char *buf, int *offset, int size) { int i = *offset; @@ -782,7 +782,7 @@ static bool uemis_delete_dive(device_dat * but the dive location API is even more crazy. We just get an id that is an * index into yet another data store that we read out later. In order to * correctly populate the location and gps data from that we need to remember - * the adresses of those fields for every dive that references the divespot. */ + * the addresses of those fields for every dive that references the divespot. */ static bool process_raw_buffer(device_data_t *devdata, uint32_t deviceid, char *inbuf, char **max_divenr, bool keep_number, int *for_dive) { char *buf = strdup(inbuf); @@ -839,9 +839,9 @@ static bool process_raw_buffer(device_da return false; } /* quickhack and workaround to capture the original dive_no - * i am doing this so I dont have to change the original design + * I am doing this so I don't have to change the original design * but when parsing a dive we never parse the dive number because - * at the time it's being read the *dive varible is not set because + * at the time it's being read the *dive variable is not set because * the dive_no tag comes before the object_id in the uemis ans file */ dive_no[0] = '\0'; @@ -1026,9 +1026,9 @@ static bool do_dump_buffer_to_file(char * filenr holds now the uemis filenr after having read several logs including the dive details, * fCapacity will five us the average number of files needed for all currently loaded data * remember the maximum file usage per dive - * return : UEMIS_MEM_OK if there is enough memeory for a full round + * return : UEMIS_MEM_OK if there is enough memory for a full round * UEMIS_MEM_CRITICAL if the memory is good for reading the dive logs - * UEMIS_MEM_FULL if the memory is exhaused + * UEMIS_MEM_FULL if the memory is exhausted */ static int get_memory(struct dive_table *td, int checkpoint) { @@ -1101,14 +1101,14 @@ static void get_uemis_divespot(const cha */ (void)get_dive_site_uuid_by_name(nds->name, &ods); if (ods) { - /* if the uuid's are the same, the new site is a duplicat and can be deleted */ + /* if the uuid's are the same, the new site is a duplicate and can be deleted */ if (nds->uuid != ods->uuid) { delete_dive_site(nds->uuid); dive->dive_site_uuid = ods->uuid; } } } else { - /* if we cant load the dive site details, delete the site we + /* if we can't load the dive site details, delete the site we * created in process_raw_buffer */ delete_dive_site(dive->dive_site_uuid); @@ -1150,7 +1150,7 @@ static bool get_matching_dive(int idx, c if (mbuf) { if (strstr(mbuf, log_file_no_to_find)) { /* we found the logfilenr that matches our object_id from the divelog we were looking for - * we mark the search sucessfull even if the dive has been deleted. */ + * we mark the search successful even if the dive has been deleted. */ found = true; if (strstr(mbuf, "deleted{bool{true") == NULL) { process_raw_buffer(data, deviceidnr, mbuf, &newmax, false, NULL); @@ -1309,7 +1309,7 @@ const char *do_uemis_import(device_data_ * As the object_id of the divelog entry and the object_id of the dive details are not necessarily the same, the match needs * to happen based on the logfilenr. * What the following part does is to optimize the mapping by using - * dive_to_read = the dive deatils entry that need to be read using the object_id + * dive_to_read = the dive details entry that need to be read using the object_id * logFileNoToFind = map the logfilenr of the dive details with the object_id = diveid from the get dive logs */ for (int i = match_dive_and_log; i < data->download_table->nr; i++) { bool success = get_matching_dive(i, newmax, &uemis_mem_status, data, mountpath, deviceidnr); @@ -1332,7 +1332,7 @@ const char *do_uemis_import(device_data_ /* if the user clicked cancel, exit gracefully */ if (import_thread_cancelled) { #if UEMIS_DEBUG & 4 - fprintf(debugfile, "d_u_i thread cancelled, bailing\n"); + fprintf(debugfile, "d_u_i thread canceled, bailing\n"); #endif break; } @@ -1352,7 +1352,7 @@ const char *do_uemis_import(device_data_ #endif } else { /* some of the loading from the UEMIS failed at the divelog level - * if the memory status = full, we cant even load the divespots and/or buddys. + * if the memory status = full, we can't even load the divespots and/or buddies. * The loaded block of divelogs is useless and all new loaded divelogs need to * be deleted from the download_table. */ _______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
