I noticed this route error as well but without access to a vissim installation I cannot tell you were this problem originates. Please compare the route of the offending vehicle in your vissim simulation with the one in sumo to determine where the network or the routes deviate. Potential error sources to check: 1) some edges were not imported correctly from the vissim network (missing or wrong directionality) 2) connectivity between edges was not imported correctly 3) the imported routes are incomplete
Let me know if you figure it out. As a workaround you could also fixed / filter the routes like this: duarouter -n net.net.xml -r out.rou.xml -o fixed.rou.xml --repair --ignore-errors regards, Jakob 2017-10-16 16:06 GMT+02:00 Phuong Nguyen <[email protected]>: > Hello, > > Thank you for sending me the fixed latest development version. > > I used netconvert command to convert vissim network file to sumo network > file and then used the lasted updated convert_vissimXML_flows_statRoutes.py > to convert the route file. Then I created a configuration file using net > and rou files achieved. > > When I run the configuration file, the result as follow: > Loading configuration... done. > Loading net-file from 'net.net.xml'... done (28ms). > Loading done. > Simulation started with time: 0.00 > Error: Vehicle 'fl140005_st0.0.0' has no valid route. No connection > between edge '140005' and edge '140003[0]'. > Quitting (on error). > > I attach results of all above steps including netconvert, > convert_vissimXML_flows_statRoutes.py and sumo-gui run.sumo.cfg to this > email. Can you please tell me where the problem come from and what I should > do to solve the problem? > > Thank you very much. > > Best regards, > > Phuong. > > On Wed, Oct 11, 2017 at 8:23 PM, Jakob Erdmann <[email protected] > > wrote: > >> Hello, >> there was a bug in convert_vissimXML_flows_statRoutes.py that has been >> fixed in the latest development version (26431). You can get it here: >> https://svn.code.sf.net/p/sumo/code/trunk/sumo/tools/import/ >> vissim/convert_vissimXML_flows_statRoutes.py >> >> regards, >> Jakob >> >> 2017-10-04 15:25 GMT+02:00 Phuong Nguyen <[email protected]>: >> >>> Hello, >>> >>> I am using the toolbox (convert_vissimXML_flows_statRoutes.py) to >>> convert vissim to sumo route file and here is result: >>> >>> Namespace(SUMO_net='net.net.xml', output_file='outputfile', >>> vissim_input='robust_hmt_matlabhoz.inpx') >>> >>> --- >>> >>> * loading VISSIM net: >>> robust_hmt_matlabhoz.inpx >>> --- >>> >>> * loading SUMO net: >>> net.net.xml >>> Traceback (most recent call last): >>> File >>> "/home/phuong/Downloads/sumo-svn/tools/import/vissim/convert_vissimXML_flows_statRoutes.py", >>> line 380, in <module> >>> validate_rel_flow(routes_by_start_d) >>> File >>> "/home/phuong/Downloads/sumo-svn/tools/import/vissim/convert_vissimXML_flows_statRoutes.py", >>> line 234, in validate_rel_flow >>> route["rel_flow"][:, 0]) == False: >>> IndexError: too many indices for array >>> >>> Can you please give me some ideas/suggestions to fix this error? >>> >>> Thank you very much. >>> >>> Best regards, >>> >>> Phuong. >>> >>> >>> On Mon, Oct 2, 2017 at 7:56 AM, Phuong Nguyen < >>> [email protected]> wrote: >>> >>>> Good morning, >>>> >>>> Thank you for your instruction. >>>> >>>> Have a good day. >>>> >>>> Best regards, >>>> >>>> Phuong. >>>> >>>> On Sun, Oct 1, 2017 at 9:40 PM, Jakob Erdmann < >>>> [email protected]> wrote: >>>> >>>>> Hello, >>>>> the toolbox is part of the sumo download. >>>>> to import routes make sure you have a working python 2.7 installation ( >>>>> https://www.python.org/downloads/) and run the tool below (in >>>>> sumo/tools/import/vissim) >>>>> >>>>> convert_vissimXML_flows_statRoutes.py -V <vissim-file> -S >>>>> <sumo-network-file> -o <output-filename> >>>>> >>>>> >>>>> regards, >>>>> Jakob >>>>> >>>>> 2017-10-01 21:37 GMT+02:00 Phuong Nguyen <[email protected] >>>>> >: >>>>> >>>>>> Dear Jakob, >>>>>> >>>>>> Thank you so much for your kindly help. >>>>>> I have successfully converted vissim inpx file to sumo (net.xml) >>>>>> file. However, in order to run the scenario using sumo, I need to convert >>>>>> route file as well. I found from http://sumo.dlr.de/wiki/N >>>>>> etworks/Import/Vissim that I can use Vissim Import Toolbox to >>>>>> convert route file but unfortunately it is described in Germany. Is this >>>>>> toolbox exist and if so, where can I download it? >>>>>> >>>>>> Thank you very much. >>>>>> >>>>>> Best regards, >>>>>> >>>>>> Phuong. >>>>>> >>>>>> >>>>>> On Thu, Sep 28, 2017 at 11:18 AM, Jakob Erdmann < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Thank you for providing the input file. >>>>>>> The error was due to a bug in netconvert which has now been fixed >>>>>>> (revision [26264]). >>>>>>> You can either build this from source on linux or download the >>>>>>> updated windows binaries tomorrow (http://sumo.dlr.de/wiki/Downl >>>>>>> oads#SUMO_-_Latest_Development_Version) >>>>>>> >>>>>>> regards, >>>>>>> Jakob >>>>>>> >>>>>>> 2017-09-28 9:41 GMT+02:00 Jakob Erdmann <[email protected]> >>>>>>> : >>>>>>> >>>>>>>> Please send me the input inpx file so I can take a look myself. >>>>>>>> regards, >>>>>>>> Jakob >>>>>>>> >>>>>>>> 2017-09-27 9:40 GMT+02:00 Phuong Nguyen < >>>>>>>> [email protected]>: >>>>>>>> >>>>>>>>> Good morning, >>>>>>>>> >>>>>>>>> I am so sorry for not explaining the report in detail. >>>>>>>>> I did replaced all empty values of xml attributes in the inpx >>>>>>>>> file. After that, I run the netconvert command again but the result >>>>>>>>> was the >>>>>>>>> same with it before I replace empty values of xml attributes. >>>>>>>>> Here it is: >>>>>>>>> >>>>>>>>> warning: Environment variable SUMO_HOME is not set, using built in >>>>>>>>> type maps. >>>>>>>>> 85 >>>>>>>>> 2 >>>>>>>>> 211.74 >>>>>>>>> -1221.07, -1531.35 -1220.78, -1530.12 -1202.48, -1346.63 -1201.82, >>>>>>>>> -1332.38 -1201.37, -1320.59 >>>>>>>>> Error: Runtime error: Empty data while parsing 'robust.inpx' >>>>>>>>> Error: No nodes loaded. >>>>>>>>> Quitting (on error). >>>>>>>>> >>>>>>>>> So, there is nothing different before and after I remove empty >>>>>>>>> values of xml attributes in the inpx file. >>>>>>>>> >>>>>>>>> Can you please give me any suggestion about this problem? >>>>>>>>> >>>>>>>>> Many thanks and have a good day. >>>>>>>>> >>>>>>>>> Best regards, >>>>>>>>> >>>>>>>>> Phuong. >>>>>>>>> >>>>>>>>> On Tue, Sep 26, 2017 at 8:41 PM, Jakob Erdmann < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> Please extend your report of "it does not work" with some details >>>>>>>>>> (i.e. an error message or other failure symptoms). >>>>>>>>>> >>>>>>>>>> 2017-09-26 18:47 GMT+02:00 Phuong Nguyen < >>>>>>>>>> [email protected]>: >>>>>>>>>> >>>>>>>>>>> Hello, >>>>>>>>>>> >>>>>>>>>>> Thank you so much for your suggestion. I have replaced all empty >>>>>>>>>>> values of xml attributes in the inpx file but it does not work. >>>>>>>>>>> Can you please give me more suggestions? >>>>>>>>>>> >>>>>>>>>>> Thank you very much. >>>>>>>>>>> >>>>>>>>>>> Best regards, >>>>>>>>>>> >>>>>>>>>>> Phuong. >>>>>>>>>>> >>>>>>>>>>> On Tue, Sep 26, 2017 at 1:44 PM, Jakob Erdmann < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> Somewhere in your inpx file is an xml attribute with an empty >>>>>>>>>>>> value (someAttribute=""). This is not expected by the importer. >>>>>>>>>>>> Search for "" in your file and try to remove the attribute (or >>>>>>>>>>>> set an appropriate value). >>>>>>>>>>>> regards, >>>>>>>>>>>> Jakob >>>>>>>>>>>> >>>>>>>>>>>> 2017-09-26 14:34 GMT+02:00 Phuong Nguyen via sumo-user < >>>>>>>>>>>> [email protected]>: >>>>>>>>>>>> >>>>>>>>>>>>> Hello, >>>>>>>>>>>>> >>>>>>>>>>>>> I am trying to convert a vissim file to sumo using below >>>>>>>>>>>>> command: >>>>>>>>>>>>> >>>>>>>>>>>>> netconvert --vissim-file=robust.inpx >>>>>>>>>>>>> --output-file=mySumofile.net.xml >>>>>>>>>>>>> >>>>>>>>>>>>> and here is result: >>>>>>>>>>>>> warning: Environment variable SUMO_HOME is not set, using >>>>>>>>>>>>> built in type >>>>>>>>>>>>> maps. >>>>>>>>>>>>> 85 >>>>>>>>>>>>> 2 >>>>>>>>>>>>> 211.74 >>>>>>>>>>>>> -1221.07, -1531.35 -1220.78, -1530.12 -1202.48, -1346.63 >>>>>>>>>>>>> -1201.82, -1332.38 >>>>>>>>>>>>> -1201.37, -1320.59 >>>>>>>>>>>>> Error: Runtime error: Empty data while parsing 'robust.inpx' >>>>>>>>>>>>> Error: No nodes loaded. >>>>>>>>>>>>> Quitting (on error). >>>>>>>>>>>>> >>>>>>>>>>>>> Can you please give me any suggestion with this problem. >>>>>>>>>>>>> >>>>>>>>>>>>> Thank you very much indeed. >>>>>>>>>>>>> >>>>>>>>>>>>> Best regards, >>>>>>>>>>>>> >>>>>>>>>>>>> Phuong. >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> Ms. Phuong Thi Mai Nguyen >>>>>>>>>>>>> PhD student, De Montfort University, >>>>>>>>>>>>> Leicester, UK. >>>>>>>>>>>>> Email: <email%[email protected]> >>>>>>>>>>>>> [email protected] >>>>>>>>>>>>> [email protected] >>>>>>>>>>>>> ------------------------------------------------------------ >>>>>>>>>>>>> ------------------ >>>>>>>>>>>>> Check out the vibrant tech community on one of the world's most >>>>>>>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>> sumo-user mailing list >>>>>>>>>>>>> [email protected] >>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/sumo-user >>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>> sumo-user mailing list >>>>>>>>>>>>> [email protected] >>>>>>>>>>>>> To change your delivery options, retrieve your password, or >>>>>>>>>>>>> unsubscribe from this list, visit >>>>>>>>>>>>> https://dev.eclipse.org/mailman/listinfo/sumo-user >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Ms. Phuong Thi Mai Nguyen >>>>>>>>>>> PhD student, De Montfort University, >>>>>>>>>>> Leicester, UK. >>>>>>>>>>> Email: <email%[email protected]> phuongthimainguyen@gmai >>>>>>>>>>> l.com >>>>>>>>>>> [email protected] >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Ms. Phuong Thi Mai Nguyen >>>>>>>>> PhD student, De Montfort University, >>>>>>>>> Leicester, UK. >>>>>>>>> Email: <email%[email protected]> phuongthimainguyen@gmai >>>>>>>>> l.com >>>>>>>>> [email protected] >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Ms. Phuong Thi Mai Nguyen >>>>>> PhD student, De Montfort University, >>>>>> Leicester, UK. >>>>>> Email: <email%[email protected]> [email protected] >>>>>> [email protected] >>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> >>>> -- >>>> Ms. Phuong Thi Mai Nguyen >>>> PhD student, De Montfort University, >>>> Leicester, UK. >>>> Email: <email%[email protected]> [email protected] >>>> [email protected] >>>> >>>> >>>> >>> >>> >>> -- >>> Ms. Phuong Thi Mai Nguyen >>> PhD student, De Montfort University, >>> Leicester, UK. >>> Email: <email%[email protected]> [email protected] >>> [email protected] >>> >>> >>> >> > > > -- > Ms. Phuong Thi Mai Nguyen > PhD student, De Montfort University, > Leicester, UK. > Email: <email%[email protected]> [email protected] > [email protected] > > >
_______________________________________________ sumo-user mailing list [email protected] To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user
