Hi fellow SUMO users,
I'm using SUMO for my master thesis project. I have a simple four way intersection with vehicle flows passing the intersection. I have had a similar setup working before but had to move the flow descriptions into an additional file to create them dynamically. Now when I try to start the configuration file with the SUMO-GUI or start the sumo.exe with the given sumocfg file both applications stop working and produce the same error both on the console application sumo.exe and sumo-gui.exe (pictures attached in archive). They both show the message: "The program cannot be executed properly because of a problem. It is stopped and I will be notified when there is a solution for the problem. I have the option to close the program or debug it. " I have no idea what the cause of this problem is. I attached a zip archive of the folder with the network file, the route file, the additional outputs, the file with vehicle flows and the sumoconfig file. Dropbox-Link as the direct attachment doesn't seem to work: https://www.dropbox.com/s/ffj2hz971v1s96f/sumo_problems.zip?dl=0 If anyone could help me with my problem showing me my mistake or point me into a direction at how I could investigate the cause of this, I would be really thankful. Thanks for your time. Kind regards, Katja -- Katja ------------------------------------------------------------------------------ _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
