Looks like your script is continuing to access the vehicle via traci after it is removed from the simulation.
Best Marek Heinrich simoserv GmbH Am 18.01.2017 um 02:17 schrieb Mani Amoozadeh: > Hi, > > > > Through TraCI, I added a vehicle into SUMO. > > Then at some point of the simulation, I remove it. > > SUMO-GUI removes the vehicle but shows the following error message: > > > > Error: Answered with error to command 0xa4: Vehicle 'stopped_veh' is not > known > > > > After the error, the simulation is on-going and everything seems to be ok. > Here what I did: > > > > 1. Adding the vehicle through TraCI with these parameters: > > > > name: "stopped_veh" > > type: "DEFAULT_VEHTYPE" > > route: rout > > depart: 5*1000 > > lanePos: 3200 > > lane: 1 > > > > 2. make the vehicle stop by changing its speed to 0 and set the lane change > mode to 0. > > 3. change the color to red > > 4. change vClass to "custome1" > > 5. set vehicle length to 5 > > 6. remove the vehicle with reason = 2 > > > > - Mani > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > sumo-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sumo-user ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
