Hello,

 

I have installed sunray server software 4.0 update2 with two V210 servers in
failover mode.  The "bge" interfaces of the servers when connected to the
gigabit backbone switch gives me incorrect flags in the "utgstatus" output.
I even forced the interfaces to 100Mbps when connecting to the backbone but
still fail to see the utgstatus flags as shown below. However when connected
to an isolated 100Mbps switch I would see the utgstatus flags as required.
The details can be seen in the below output.

 

To diagnose the network ports on the backbone switch I connected another two
servers running SRSS3.1 and solaris 9. I found that the failover group
status show fine under this setup.

 

I would be thankfull to you all for any advice on diagnosing and resolving
this problem.

 

Failover group Status (Interfaces connected to Gigabit backbone)

[EMAIL PROTECTED] # utgstatus

host    flags    interface     flags    interface     flags

                 10.0.4.0/23            10.0.212.0/24

-------------    -------------------    -------------------

fesunray80 TN    10.0.5.68       U--    10.0.212.11     UAM

fesunray90 TN    10.0.5.67       ---    10.0.212.12     -AM

[EMAIL PROTECTED] # utgstatus

host    flags    interface     flags    interface     flags

                 10.0.4.0/23            10.0.212.0/24

-------------    -------------------    -------------------

fesunray90 TN    10.0.5.67       U--    10.0.212.12     UAM

fesunray80 TN    10.0.5.68       ---    10.0.212.11     -AM

 

Failover group Status (Interfaces connected to local Isolated 100 MBps
switch)

[EMAIL PROTECTED] # utgstatus

host    flags    interface     flags    interface     flags

                 10.0.4.0/23            10.0.212.0/24

-------------    -------------------    -------------------

fesunray80 TN    10.0.5.68       U--    10.0.212.11     UAM

fesunray90 TN    10.0.5.67       U--    10.0.212.12     UAM

 

[EMAIL PROTECTED] # utgstatus

host    flags    interface     flags    interface     flags

                 10.0.4.0/23            10.0.212.0/24

-------------    -------------------    -------------------

fesunray90 TN    10.0.5.67       U--    10.0.212.12     UAM

fesunray80 TN    10.0.5.68       U--    10.0.212.11     UAM

 

Thanks in Advance,

 

Mohammed Kaleemuddin

Systems Administrator - Technical Support Department 

 

_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users

Reply via email to