Hi Kaleemuddin, It seems to disabled multicast on the backbone switch, i believe that basically CISCO bockbone will disable muticast packet even through it's in the same VLAN.
Best regards, Kevin, 2007/12/3, Kaleemuddin, Mohammed <[EMAIL PROTECTED]>: > > > > Hello, > > > > I have installed sunray server software 4.0 update2 with two V210 servers in > failover mode. The "bge" interfaces of the servers when connected to the > gigabit backbone switch gives me incorrect flags in the "utgstatus" output. > I even forced the interfaces to 100Mbps when connecting to the backbone but > still fail to see the utgstatus flags as shown below. However when connected > to an isolated 100Mbps switch I would see the utgstatus flags as required. > The details can be seen in the below output. > > > > To diagnose the network ports on the backbone switch I connected another two > servers running SRSS3.1 and solaris 9. I found that the failover group > status show fine under this setup. > > > > I would be thankfull to you all for any advice on diagnosing and resolving > this problem. > > > > Failover group Status (Interfaces connected to Gigabit backbone) > > [EMAIL PROTECTED] # utgstatus > > host flags interface flags interface flags > > 10.0.4.0/23 10.0.212.0/24 > > ------------- ------------------- ------------------- > > fesunray80 TN 10.0.5.68 U-- 10.0.212.11 UAM > > fesunray90 TN 10.0.5.67 --- 10.0.212.12 -AM > > [EMAIL PROTECTED] # utgstatus > > host flags interface flags interface flags > > 10.0.4.0/23 10.0.212.0/24 > > ------------- ------------------- ------------------- > > fesunray90 TN 10.0.5.67 U-- 10.0.212.12 UAM > > fesunray80 TN 10.0.5.68 --- 10.0.212.11 -AM > > > > Failover group Status (Interfaces connected to local Isolated 100 MBps > switch) > > [EMAIL PROTECTED] # utgstatus > > host flags interface flags interface flags > > 10.0.4.0/23 10.0.212.0/24 > > ------------- ------------------- ------------------- > > fesunray80 TN 10.0.5.68 U-- 10.0.212.11 UAM > > fesunray90 TN 10.0.5.67 U-- 10.0.212.12 UAM > > > > [EMAIL PROTECTED] # utgstatus > > host flags interface flags interface flags > > 10.0.4.0/23 10.0.212.0/24 > > ------------- ------------------- ------------------- > > fesunray90 TN 10.0.5.67 U-- 10.0.212.12 UAM > > fesunray80 TN 10.0.5.68 U-- 10.0.212.11 UAM > > > > Thanks in Advance, > > > > Mohammed Kaleemuddin > > Systems Administrator - Technical Support Department > > > _______________________________________________ > SunRay-Users mailing list > [email protected] > http://www.filibeto.org/mailman/listinfo/sunray-users > > _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
