[EMAIL PROTECTED] wrote:
utquery on the remote DTU came back with this:
bash-3.00# ./utquery -d 192.168.52.100
terminalID=00144f7cd829
terminalIPA=192.168.52.100
model=SunRayP8
Subnet=255.255.255.0
LeaseTim=86400
DHCPServer=192.168.52.3
INFORMServer=192.168.52.3
It is getting DHCPINFORM from 192.168.52.3 server ,
where as your actual firmware server is 192.168.16.21.
Make sure your DTU receives the DHCPINFORM response
from 192.168.16.21 or pass tftpSrvr value as 192.168.16.21
in your DHCP server 192.168.52.3.
tftpSrvr=ˬ
The above "A" value doesn't help anyway unless you have the
server name with "A" and also pass DNS parameters through
your DHCP server that resolves the name A.
Thanks
P.S.M.Swamiji
Note:These are my personal opinions,nothing to do with my employer
currentAuth=192.168.16.22
currentFW=MfgPkg_4.15_2006.07.20.16.57
currentBarrier=310
currentBarrierLevel=310
AltAuth=192.168.16.21,192.168.16.22,192.168.16.23
bash-3.00#
Is that a way to push firmware to specific DTU?
Do I need to add "./utfwadm -A -f /opt/SUNWut/lib/firmware -n e1000g0 -N
192.168.52.0 -V"?
Thanks.
[EMAIL PROTECTED] wrote on 18/01/2008 14:42:37:
Hi,
We are setting up a new remote office and are testing Sunray DTU
connection.
We managed to get the remote DTU to connect to our central SRSS i.e. I
can
see
the Insert Card OSD.
However, the DTU is not pulling the new firmware.
I have used "./utadm -A <new VLAN> " to register the new subnet.
And ./utadm -l shows:
bash-3.00# ./utadm -l
LAN connections: On
Subnetwork: 192.168.16.0 <pri site>
Netmask= 255.255.255.0
Broadcast= 192.168.16.255
Router= 192.168.16.1
AuthSrvr= 192.168.16.21 <pri server>
AltAuth= 192.168.16.21 255.255.255.255
FirmwareSrvr= 192.168.16.21
NewTver= 4.0_127553-01_2007.11.09.17.41
IP assignment= 22/50 (192.168.16.201)
Subnetwork: 192.168.52.0 <remote site>
Netmask= 255.255.255.0
AuthSrvr= 192.168.16.21
AltAuth= 192.168.16.21 255.255.255.255
FirmwareSrvr= 192.168.16.21
NewTver= 4.0_127553-01_2007.11.09.17.41
bash-3.00#
And we have added the following settings to our router (acting as DHCP
servers):
option 49 ip 192.168.16.21 192.168.16.22 192.168.16.23
option 35 ip 192.168.16.21 192.168.16.22 192.168.16.23
option 23 ascii "4.0_127553-01_2007.11.09.17.41"
option 31 ip 192.168.16.21
option 66 ip 192.168.16.21
When the DTU starts up, it will cycle through 192.168.16.21 to 23, and
eventually connects to one of them. But it is not downloading the new
firmware 4.0_127553-01_2007.11.09.17.41
Firewall rules are relaxed at the moment, but I do not see TFTP packets
passing around.
Any other idea what is wrong?
Thanks for the advice and help.
Regards,
********************************************************************************
IMPORTANT NOTICE: This email and any files transmitted with it is
intended only for the use of the person(s) to whom it is addressed, and
may contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the intended recipient,
please immediately notify the sender and delete the email. Thank you.
********************************************************************************
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
***************************************************************************
IMPORTANT NOTICE:
This email and any files transmitted with it is intended only for
the use of the person(s) to whom it is addressed, and may
contain information that is privileged, confidential and exempt
from disclosure under applicable law. If you are not the intended
recipient, please immediately notify the sender and delete
the email. Thank you.
***************************************************************************
********************************************************************************
IMPORTANT NOTICE: This email and any files transmitted with it is
intended only for the use of the person(s) to whom it is addressed, and
may contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the intended recipient,
please immediately notify the sender and delete the email. Thank you.
********************************************************************************
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
