Ben, Make sure you configured the same FOG signature on both servers when you ran utconfig. You can enter a new one without re-configing by running utgroupsig (in /opt/SUNWut/sbin).
William Yang ----- Original Message ----- From: Benoit Audet To: [email protected] Sent: Tuesday, January 22, 2008 6:09 PM Subject: [SunRay-Users] 2 hosts stopping to communicate in a FOG Hi fellow sunray admins, I am facing a strange problem on a new setup here. My client have two T6300 blades in a Sun Blade 6000 enclosure, and wants to have both blades configured as SunRay servers in a FOG. I arrived and Solaris has been installed via Jumpstart (not made by me) and this is Solaris 8/07 on both blades. Everything seem to be operating perfectly, network, and so on. I installed SRSS 4.0 on both servers, with uttsc (SRWC) 2.0, and I installed as well Sun Desktop Manager 1.0.1 as well, since my client wants to use JDS desktops to his users. I as well installed patches 127553-01 and 127556-01. Once the setup has been done, I tried to put it in a FOG with the following stepds: (1) on the master; I ran "utreplica -p secondary-server"; (2) on the secondary: I ran "utreplica -s master-server"; (3) I ran "rdate" on both server, even if the servers are NTP clients; (4) I then ran "utfwsync" on the secondary server (but I did as well on the master after playing around...); (5) Rebooted one and the other server... And the problem is that, when logging into the web interface (https://master-server:1661, etc.), on the master or the slave, there is only one server on both web interfaces... Looks like synchronisation is not working. When I do, on both server, "utreplica -l", it lists both "master" and "secondary" properly, but that's it. I then thought of something, and I ran "netservices open" on both servers, but nothing went better. I ran the "/opt/SUNWut/srds/sbin/utpulld -o" command, and all it tells me, is: "utpulld: terminating normally, no pull_replica lines in config file"... And then, suddenly, in the web interface, I was able to see both servers in the servers list, and it was there on both servers' web interfaces... ...but it disappeared. Browsing the log files, I found this little line: "Host a1012bf01 is un-communicative, treating it as untrusted.." Is there something I'm missing??? I went through more than one SunRay setups, and never faced a problem like this one... Any help will be more than welcome! Ben Audet _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
