Ok, I found something that Martin Parodi posted a while ago, and I followed his way to dig the problem, and it worked for me! Here's the link to his post:
http://www.mail-archive.com/[email protected]/msg07779.html Quickly, I uncommented and put the "false" value to the parameter "enableMulticast" into "/etc/opt/SUNWut/auth.props", and after that, I did "utreplica -p -d secondary-server", and on the secondary, I did "utreplica -u", and I configured the secondary as the new primary server, adding the primary as the new secondary server, and then it worked flawlesly. After that done, I did the same thing to put back both servers to their original "roles" (primary and secondary) and everything is working properly now. Thanks to all, thanks to William and Martin Parodi! Ben On Wed, 23 Jan 2008 08:39:47 -0500, Benoit Audet wrote > Thanks William for your reply. I did reenter the FOG signature on both > servers, but things are going from bad to worse now... > > After changing the signature on both servers, I restarted the "utfwsync" > command, and now I receive this message: > > Jan 23 08:21:20 tcr02snray00001 utdsd[686]: Bind failed ; act as anonymous > > I searched a bit around this, and compared these files: > - /etc/opt/SUNWut/utadmin.pw > - /etc/opt/SUNWut/utadmin.conf > > and both files are looking exactly the same, with the same > permissions and ownsership. > > I then decided to reset password with "utpw" on both servers, and > after doing so (I put the same password on both server), I > relaunched a "utfwsync", and now I receive this message: > > utpulld[8927]: Error: ldap_sasl_bind (host tcr02snray00001, DN > cn=admin,o=utdata) returned: Invalid credentials > > I'm starting to scratch my head really hard now... ...what the hell > am doing wrong??? > > Thanks in advance! > > Ben > > On Tue, 22 Jan 2008 18:44:05 -0500, William Yang wrote > > Ben, > > > > Make sure you configured the same FOG signature on both servers when > > you ran utconfig. You can enter a new one without re-configing by > > running utgroupsig (in /opt/SUNWut/sbin). > > > > William Yang > > ----- Original Message ----- > > From: Benoit Audet > > To: [email protected] > > Sent: Tuesday, January 22, 2008 6:09 PM > > Subject: [SunRay-Users] 2 hosts stopping to communicate in a FOG > > > > Hi fellow sunray admins, > > > > I am facing a strange problem on a new setup here. My client have > > two T6300 blades in a Sun Blade 6000 enclosure, and wants to have > > both blades configured as SunRay servers in a FOG. I arrived and > > Solaris has been installed via Jumpstart (not made by me) and this > > is Solaris 8/07 on both blades. Everything seem to be operating > > perfectly, network, and so on. > > > > I installed SRSS 4.0 on both servers, with uttsc (SRWC) 2.0, and I > > installed as well Sun Desktop Manager 1.0.1 as well, since my > > client wants to use JDS desktops to his users. I as well installed > > patches 127553-01 and 127556-01. > > > > Once the setup has been done, I tried to put it in a FOG with the > > following > > stepds: > > (1) on the master; I ran "utreplica -p secondary-server"; > > (2) on the secondary: I ran "utreplica -s master-server"; > > > > (3) I ran "rdate" on both server, even if the servers are NTP clients; > > > > (4) I then ran "utfwsync" on the secondary server (but I did as > > well on the master after playing around...); > > (5) Rebooted one and the other server... > > > > And the problem is that, when logging into the web interface > > > > (https://master-server:1661, etc.), on the master or the slave, > > there is only one server on both web interfaces... Looks like > > synchronisation is not working. When I do, on both server, > > "utreplica -l", it lists both "master" and "secondary" properly, > > but that's it. > > > > I then thought of something, and I ran "netservices open" on both > > servers, but nothing went better. > > > > I ran the "/opt/SUNWut/srds/sbin/utpulld -o" command, and all it > > tells me, is: "utpulld: terminating normally, no pull_replica lines > > in config file"... > > > > And then, suddenly, in the web interface, I was able to see both > > servers in the servers list, and it was there on both servers' web > > interfaces... ...but it disappeared. > > > > Browsing the log files, I found this little line: > > "Host a1012bf01 is un-communicative, treating it as untrusted.." > > > > Is there something I'm missing??? I went through more than one > > SunRay setups, and never faced a problem like this one... Any help > > will be more than welcome! > > > > Ben Audet > > _______________________________________________ > > SunRay-Users mailing list > > [email protected] > > http://www.filibeto.org/mailman/listinfo/sunray-users > > Benoît Audet > GRAB Informatique Inc. > [EMAIL PROTECTED] > Tel.: (418) 871-6946 #25 > Cel.: (418) 802-5882 > > _______________________________________________ > SunRay-Users mailing list > [email protected] > http://www.filibeto.org/mailman/listinfo/sunray-users Benoît Audet GRAB Informatique Inc. [EMAIL PROTECTED] Tel.: (418) 871-6946 #25 Cel.: (418) 802-5882 _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
