Hi all, This seems to be a recurring theme here, but here goes... I've installed a very small Sun Ray system where my wife works, and they're complaining about poor graphics performance, especially when scrolling a browser window. The effect is reminiscent of the bad old days of interlaced images over a dialup connection. (Applications seem to run at an acceptable speed, just screen refreshes could be improved.)
I've a few things here which might be applicable, but I'd like to get to the bottom of this issue and solve it once and for all! The server is a Sun Fire X2100 with a 2.2 GHz Opteron 148 CPU, 4 GB of RAM, and dual 80 GB disks. They are using a 16-port GBE switch, specifically a Netgear GS116 with CAT 5e cabling. There are only two thin clients on this network: a Sun Ray 2 FS and a Sun Ray 2; both have 22" inch monitors. The operating system is build 82 of Nevada (a little old, I know), and they're using SRSS 4.0 with patch 127554-03 applied. The thin clients have been power cycled and are running the updated firmware contained in that patch. I briefly tried swapping out the GBE switch for a Netgear 100 baseT one, but that didn't seem to make much (if any) difference. Any help greatfully received! TIA, -- Rich Teer, SCSA, SCNA, SCSECA CEO, My Online Home Inventory URLs: http://www.rite-group.com/rich http://www.linkedin.com/in/richteer http://www.myonlinehomeinventory.com _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
