- Forget about the SunRay for a moment: does the smartcard work when connecting from a PC using the MS RDP client to the WTS? Maybe a dumb question but I had to ask. If it does not work, than the WTS needs the right card-reading SW [or an updated version].
- If it does work vi MS RDP, do you perhaps need a specialized config file for that card in /etc/opt/SUNWut/smartcard? I use a card type that wasn't included in the default set of config files and a Sun person was kind enough to write one for me. I see it listed when I run "utcard -l". From: sunray-users-boun...@filibeto.org [mailto:sunray-users-boun...@filibeto.org] On Behalf Of Fuerle, Thomas Sent: Wednesday, September 11, 2013 6:55 AM To: 'SunRay-Users mailing list' Subject: EXT :Re: [SunRay-Users] Gemalto smart card reader usbdrived uses -r disk ... -r disk and -r scard:on behaves like a RDP Client, while -r usb:on sends the device locally to WTS2008 R2 so it should appear as "found new device, installing driver or so ...". But cannot recommend that with WTS2008r2 as all sessions see the new device, thats why we also use usbdrived and -r disk for usb mass storage. and you need some software installed on the wts, which you find in the srs add ons directory, what I can remember. This is the point where we stopped, no software install on the wts. regards, thomas Von: sunray-users-boun...@filibeto.org [mailto:sunray-users-boun...@filibeto.org] Im Auftrag von Wall, Simon Gesendet: Mittwoch, 11. September 2013 11:30 An: SunRay-Users mailing list Betreff: Re: [SunRay-Users] Gemalto smart card reader Thanks Thomas, I will give that a go. I am using the usbdrived script to pass through USB mass storage devices. I assume putting the "-r usb:on" won't affect that? Simon From: sunray-users-boun...@filibeto.org [mailto:sunray-users-boun...@filibeto.org] On Behalf Of Fuerle, Thomas Sent: 11 September 2013 10:20 To: 'SunRay-Users mailing list' Subject: Re: [SunRay-Users] Gemalto smart card reader to pass through you need -r usb:on (which passes any detected usb device through), -r scard:on enables the smart card reader of the sun ray for a RDP session. regards, thomas Von: sunray-users-boun...@filibeto.org [mailto:sunray-users-boun...@filibeto.org] Im Auftrag von Wall, Simon Gesendet: Mittwoch, 11. September 2013 11:10 An: SunRay-Users mailing list Betreff: Re: [SunRay-Users] Gemalto smart card reader Hi Deyrick, Thanks for your response. The PC/SC layer is incorporated into the SRS install itself with SRS 5.3.1 and the documentation says that I just needed to install the CCID Handler. Are you saying that I need to enable "scard:on" for the uttsc command to pass through the external smart card reader? Regards, Simon From: sunray-users-boun...@filibeto.org [mailto:sunray-users-boun...@filibeto.org] On Behalf Of Deyrick Allen Sent: 11 September 2013 09:57 To: SunRay-Users mailing list Subject: Re: [SunRay-Users] Gemalto smart card reader Not sure if this helps think the issue is to install the pcsc layer first so the smartcard reader gets attached. http://docs.oracle.com/cd/E19634-01/820-3776/admin.html Kind Regards Deyrick Allen Sales & Marketing Manager Tel: +44 (0)1706 260342 Mobile: +44 (0)752 540 6005 Fax: +44 (0)845 230 0079 e-mail: deyrickal...@usmartcards.com Website: www.usmartcards.com Universal Smart Cards Limited Kingfisher Business Centre Burnley Road Rawtenstall Rossendale Lancashire BB4 8EQ The information contained in this message or any of its attachments may be privileged and confidential and intended for the exclusive use of the addressee. The views expressed may not be official policy but the personal views of the originator. If you are not the addressee any disclosure, reproduction, distribution, other dissemination or use of this communication is strictly prohibited. If you have received this message in error, please notify the author by replying to the email and then delete it from your system. Universal Smart Cards Limited may monitor incoming and outgoing emails and other electronic transmissions made via its systems. Universal Smart Cards Limited, registered in England number 4278501. Registered Office: Unit 9 Devonshire Business Park, 4 Chester Road, Borehamwood, Hertfordshire WD6 1NA. From: sunray-users-boun...@filibeto.org [mailto:sunray-users-boun...@filibeto.org] On Behalf Of Wall, Simon Sent: 11 September 2013 09:33 To: SunRay-Users mailing list Subject: [SunRay-Users] Gemalto smart card reader Hi All, Has anyone managed to get the Gemalto ID Bridge CT30 smart card reader working when attached to a Sunray and passed through to a Windows 2008 R2 TS kiosk session? I have followed the instructions for SRS 5.3.1 to add the CCID handler v1.3 from the SRS 5.1.1. media pack and the Drivers for the smart card reader are installed on the 2008 Rs TS but the smart card reader is still not being passed through to the Windows TS session. Thanks in advance Simon ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please visit http://www.symanteccloud.com ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please visit http://www.symanteccloud.com ______________________________________________________________________ _________________ Diese Nachricht wurde vom OeNB Mailserver TLS verschluesselt empfangen _________________ Diese Nachricht wurde vom OeNB Mailserver TLS verschluesselt empfangen _______________________________________________ SunRay-Users mailing list SunRay-Users@filibeto.org http://www.filibeto.org/mailman/listinfo/sunray-users
