SCSI termination is fun!!!! There is a possibility that termination is a possibility on the drive instead of relying the controller to do so. I have a question about the drive though.......does it spin up or anything.........cause if it does then it probably works.......scsi drives are hard to kill....very hard to kill.......especially the older ones
So if the drive spins up at all.......then the drive might be aight......My Barracuda's all have option for termination on the drive....i own about 15 drives total......all still working Check the termination.......... On that note......termination doesn't denote that a drive is unsupported.....it mainly has to do with the driver that your disk formatting utility is using....since the disk tools image you are using is fairly old......then in all likelihood the drive will work you just need a newer version of disk tools........one from an 8.5 cd should do it.....maybe 9.1 even Just some thoughts from a scsi laden person -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
