...Have you connected the drives to the built in "slow" SCSI? If you did, your ID setting for the drive that was already in the new machine should be between 1 and 7, which is the highest ID# that that type of SCSI can go to. What does ASP identify that drive ID # as? You may have to change the ID of the drive that you moved into the machine... and that could mean looking up the settings on the Mfr's site...
dan_A -------------------------- ...(1) I would guess that you have SCSI termination enabled on both 2GB drives and so the one at the end of the cable isn't being seen, because it is beyond the termination of the other drive... Jeff Walther --------------------------- Dan and Jeff, Thanks for your replies. The drive is connected to the the built-in slow SCSI. I'll check again as to what the ID#s are. Exactly how do I go about disabling/enabling termination on the new internal SCSI drive that I am connecting? Thanks, Elliot -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com ---------------------------------------------------------------
