On 11/2/10, Ákos Maróy <a...@maroy.hu> wrote: > Andrey, > actually, this web interface resets the IP address, but not the gateway > or the broadcast address. I was looking in /etc to find where these > settings are saved, but didn't find then there.. > > where would I change these manually, via an ssh connection? > > > Akos >
Akos, Sebastian will look at the problem of not changing those settings and try to reproduce your case. He may need more input from your. Changing those settings manually permanently can be done through the browser (there is a link on the camera home page) http://192.168.0.9/admin-bin/editcgi.cgi?file=/etc/conf.d/net.eth0 But after changing that file I would recommend to synchronize the camera JFFS file system, to keep it happy (i.e. with wget http://192.168.0.9/phpshell.php?command=sync or opening that link in the browser, otherwise camera will complain about checksum mismatch at every boot in the messages (dmesg) until that particular block will be overwritten. Command reboot -f would synchronize too. Andrey _______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com