Shawyoo, it is OK to release code and diagrams before they are completely finished.
Honestly - I believe it is a big and difficult project to make such camera, especially if it is just a student project - development of the hardware is rather expensive in my experience. To make the project manageable So I would recommend you to use Elphel 10353 system board, and just develop the sensor board (and the FPGA/softwaer code, of course). After you'll make it working, you can replace the system board too, if needed. Andrey
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
