On Fri, Sep 2, 2011 at 7:59 AM, Diana Carrigan <[email protected]>wrote:
> We have not changed any code in the camera. I power cycled the camera and > now we can not communicate to it thru Ethernet or the Serial cable connected > to the 10369 IO board. > Diana, you wrote that the serial cable was connected to the camera. Before you lost communication with the camera - did you configure some terminal emulator (i.e. minicom) to see camera boot messages on the system console? If yes - what happens now on that port? The baud rate on the port is 115k. Andrey > Prior to power cycling the camera we could communicate and run video and > camera applications. The Ethernet green and yellow lights are blinking, and > the light on the power supply is green.**** > > ** ** > > Any suggestions?**** > > ** ** > > Diana Carrigan**** > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
