Looks like I have fixed the problem The ribbon cable connected to the internal harddrive was loose. I reseated it. Powered it up and everything is working now! I noticed it booted up really fast this time. In the past it did not.
Thanks, Diana From: [email protected] [mailto:[email protected]] On Behalf Of Andrey Filippov Sent: Friday, September 02, 2011 9:18 AM To: Diana Carrigan Subject: Re: [Elphel-support] Can't communicate with Elphel353 Diana, So were you able to communicate via serial port? How did you do that? What was it exactly there? What happens on the serial port now? Andrey On Fri, Sep 2, 2011 at 8:23 AM, Diana Carrigan <[email protected]<mailto:[email protected]>> wrote: Hi Andrey, I don't think I configured anything. I just wanted to see if I could hook up thru the serial cable at the baud rate 115K and I could. Later in the day, I could no longer communicate via the Ethernet, so I power cycled. Since then nothing has worked. A couple of days ago, when I powered up the camera, it took three power cycles before the Ethernet communication started working. So I'm not sure what happened. Possibly a hardware issue? Diana From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Andrey Filippov Sent: Friday, September 02, 2011 8:17 AM To: Diana Carrigan; [email protected]<mailto:[email protected]> Subject: Re: [Elphel-support] Can't communicate with Elphel353 On Fri, Sep 2, 2011 at 7:59 AM, Diana Carrigan <[email protected]<mailto:[email protected]>> wrote: We have not changed any code in the camera. I power cycled the camera and now we can not communicate to it thru Ethernet or the Serial cable connected to the 10369 IO board. Diana, you wrote that the serial cable was connected to the camera. Before you lost communication with the camera - did you configure some terminal emulator (i.e. minicom) to see camera boot messages on the system console? If yes - what happens now on that port? The baud rate on the port is 115k. Andrey Prior to power cycling the camera we could communicate and run video and camera applications. The Ethernet green and yellow lights are blinking, and the light on the power supply is green. Any suggestions? Diana Carrigan _______________________________________________ Support-list mailing list [email protected]<mailto:[email protected]> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com _______________________________________________ Support-list mailing list [email protected]<mailto:[email protected]> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
