Quick email from my holiday destination :) I just swapped the system boards of the 2 cameras I have to assemble the one for Patrick. I am 100% sure both cameras worked flawlessly before and also tested the camera after assembly I just didn't test the sata port individually at the time. What does the bootlog/dmesg indicate ? Sorry, I can't really spend time to debug anything here on my phone?
Regards Sebastian Am 05.08.2013 14:57 schrieb "Patrick Eisenkeil" <patethek...@gmx.net>: > We found out that our camera was build from sebastian pichelhofer with > parts of two cameras one with a internal IDE and one with an external HDD. > He told us that he used the pcb from the camera with the internal IDE to > build the camera. Maybe the SATA port is disabled is there any possibility > to enable it. > > Patrick > > *Gesendet:* Montag, 29. Juli 2013 um 21:44 Uhr > *Von:* support-list <support-list@support.elphel.com> > *An:* "Patrick Eisenkeil" <patethek...@gmx.net>, "Elphel List" < > support-list@support.elphel.com> > *Betreff:* Re: [Elphel-support] Elphel NC353L No HDD found > Hello Patric, > > Our records show that this camera was assembled from the boards outside of > Elphel, so while each board was tested individually, we did not have a > chance to test the assembled camera. Do you know if the camera did work > with SATA disk before? > > Andrey > > > > _______________________________________________ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com